GB/T 16471-2008Dimensional and weight constraints for transport package (English PDF)

Foreword

This standard replaces GB/T 16471-1996 "transport package size limit" and GB/T 18923-2002 "quality community transport packages limit". This standard and GB/T 16471-1996 and GB/T 18923-2002 main changes are as follows:

--- Remove the "Definitions" chapter;

--- Direct expression of the "general requirements" and "specific requirements" (see Chapters 3 and 4);

--- Based on existing standards in the case of the contents been adjusted accordingly (see Chapter 3, Chapter 4 and Appendix A, Appendix B, Appendix C, Appendix D). The Standard Appendix A, Appendix B, Appendix C, Appendix D are informative appendices. The standard proposed by the Standardization Administration of China. This standard by the National Packaging Standardization Technical Committee (SAC/TC49) centralized. This standard was drafted. Academy of Transportation Sciences, the Ministry of Railways Institute of Standards and metrology, China Civil Aviation Administration of Aviation Safety Technology Heart, China Packaging Federation, Mechanical Engineering Research Institute. The main drafters of this standard. Bears before Kai, Wang Wei, Zhang Jin, Qing Hongyu, Wang Li, yellow snow. This standard replaces the standards previously issued as follows:

--- GB/T 16471-1996;

--- GB/T 18923-2002. Transport package size and quality limit

1 Scope

GB/T 16471-2008 is the Chinese national standard on dimensional and weight constraints for transport package, in the field of packaging and distribution of goods. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 1 February 2008 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 July 2008. Classification: ICS 55.020, CCS A80. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

This standard specifies the overall dimensions and mass via the outer roads, railways, waterways, air transport transport package boundaries. This standard applies to roads, railways, waterways, air transport transport package design and transportation.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 1413 Series 1 freight containers - Classification, dimensions and ratings ( GB/T 1413-1998, idt ISO 668.1995)

3 General requirements

For roads, railways, waterways, air transport transport package maximum length, width and height, respectively, should not exceed the appropriate means of transport can transport foot Inch, maximum mass not exceed its maximum load.