JB/T 11824-2014Advanced Dewatering Equipment for Sludge (English PDF)
污泥深度脱水设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11824-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11824-2014 is the English-translated version of 污泥深度脱水设备.
JB/T 11824-2014 is a recommended Chinese machinery industry standard for equipment carrying out the deep dewatering of sludge. It gives the types and basic parameters of that equipment, the technical requirements, the test methods and the inspection rules, together with the provisions on logos, packaging, transport and storage.
The sludge of municipal wastewater treatment plants is what it is written for. The Chinese classification is J88 and the international classification 13.060.30, while the issuing body is the Ministry of Industry and Information Technology.
Among the standards it quotes are GB/T 1040.1, GB/T 3766, GB 5226.1, GB 8978 and CJ/T 221.
Found what you need?
Document preview — JB/T 11824-2014
National Standard of the People's Republic of China
- ICS
- 13.060.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11824-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for equipment carrying out the deep dewatering of sludge. It gives the types and basic parameters of that equipment, the technical requirements, the test methods and the inspection rules, together with the provisions on logos, packaging, transport and storage. The sludge of municipal wastewater treatment plants is what it is written for. The Chinese classification is J88 and the international classification 13.060.30, while the issuing body is the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 1040.1, GB/T 3766, GB 5226.1, GB 8978 and CJ/T 221.
JB/T 11824-2014 falls under ICS 13.060.30, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1040.1
GB/T 1040.2-2006 — Plastic - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic
GB/T 1043.1
GB/T 1634.1
GB/T 1634.2-2004 — Plastics - Determination of temperature of deflection under load - Part 2: Plastids, ebonite and long-fibre-reinforced composites
GB 2894
GB/T 3766
GB 5226.1
GB/T 7780
GB/T 7932
GB 8978
GB/T 9341
GB/T 10894
GB/T 12670
GB/T 13306
GB/T 13384
GB/T 16471
CJ/T 221
JB/T 4333.2
JB/T 4333.3
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11826-2014 — Technical Specification for Sludge Incineration Treatment of Municipal Wastewater Treatment Plant
JB/T 11825-2014 — Sludge incinerators for municipal wastewater treatment plants
JB/T 11823-2014 — High gradient tramp iron separators for purification of port conveyed materials
6 Classification and status
International classification (ICS): 13.060.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1040.1Plastics - Determination of tensile properties - Part 1: General principles
- GB/T 1040.2-2006Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1043.1Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
- GB/T 1634.1Plastics - Determination of temperature of deflection under load - Part 1: General test method
- GB/T 1634.2-2004Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
Similar standards
How to Download JB/T 11824-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 11824-2014
$205.00