JB/T 5135.1-2013General Utility Small Gasoline Engine - Part 1: Technical Specification (English PDF)
通用小型汽油机 第1部分:技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5135.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 5135.1-2013 is the English-translated version of 通用小型汽油机 第1部分:技术条件.
JB/T 5135.1-2013 is the Chinese machinery industry standard covering general Utility Small Gasoline Engine, Part 1: Technical Specification. It was issued on 25 April 2013 and has been in force since 1 September 2013, replacing JB/T 5135.3-2001.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2013 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 5135.1-2013
National Standard of the People's Republic of China
- Replacing
- JB/T 5135.3-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 5135.1-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 5135.1-2001.
It is one of 7 parts of the JB/T 5135 series.
2 Scope Preview
JB/T 5135.1-2013 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 5135.2-2001 — General purpose small gasoline engines - Test and evaluation methods for reliability and durability
JB/T 5135.2-2013 — Part 2: Performance Test Method
JB/T 5135.2-2025 — General gasoline engine - Part 2: Bench performance test method
JB/T 5135.3-2001 — General purpose small gasoline engines - Technical requirements
JB/T 5135.3-2013 — Part 3: Test Evaluate Method of Reliability and Durability
JB/T 5135.3-2025 — General gasoline engine - Part 3: Reliability and durability test and evaluation method
Other editions:
JB/T 5135.1-2025 (later edition)
JB/T 5135.1-2001 (earlier edition)
Standards on related subjects:
GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise
JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors
JB/T 5140.1-2021 — Magnetos - Part 1: Terminology
5 Classification and status
Chinese Standard Classification (CCS): J 91
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 45165-2024Small high pressure cleaning machines
- LY/T 1486-2023Hand-held earth augers
- LY/T 1618-2022Backpack type wind sweeper powered by gasoline engine
- LY/T 1668-2022Portable collection, crushing and sweeping machine powered by gasoline engine
- LY/T 3305-2022Hand-held transplanting tree digging machine powered by gasoline engine
- LY/T 3307-2022Hand-push mowing and scarifying machine powered by gasoline engine
Similar standards
Editions of JB/T 5135.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5135.1-2013 | General Utility Small Gasoline Engine - Part 1: Technical Specification | current edition | Current |
| JB/T 5135.3-2001 | General Utility Small Gasoline Engine - Part 1: Technical Specification | previous edition | Superseded |
This page sells the current edition, JB/T 5135.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 5135.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 5135.2-2025 — General gasoline engine - Part 2: Bench performance test method
JB/T 5135.2-2013 — General Utility Small Gasoline Engine - Part 2: Performance Test Method
JB/T 5135.2-2001 — General purpose small gasoline engines - Test and evaluation methods for reliability and durability
JB/T 5135.1-2013
$195.00