Valid

JB/T 11036-2010Single-cylinder gas engines - Technical requirements and test methods (English PDF)

单缸燃气机 技术条件和试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11036-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 11036-2010 is the English-translated version of 单缸燃气机 技术条件和试验方法.

JB/T 11036-2010 is a recommended Chinese machinery industry standard giving the technical requirements and test methods for single-cylinder gas engines. Besides the requirements and the test methods it covers inspection rules, signs, packaging, transport and storage.

The engines it addresses are fuelled with natural gas or liquefied petroleum gas, and the standard applies to spark-ignition reciprocating single-cylinder gas engines burning gaseous fuel; single-cylinder gas engines burning other gaseous fuels may be handled by reference to it.

Its Chinese classification is J91 and its international classification 27.020. Among the standards it quotes are GB 4556, GB/T 6072.1 and GB 18047.

Found what you need?

Document preview — JB/T 11036-2010

National Standard of the People's Republic of China

ICS
27.020

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11036-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard giving the technical requirements and test methods for single-cylinder gas engines. Besides the requirements and the test methods it covers inspection rules, signs, packaging, transport and storage. The engines it addresses are fuelled with natural gas or liquefied petroleum gas, and the standard applies to spark-ignition reciprocating single-cylinder gas engines burning gaseous fuel; single-cylinder gas engines burning other gaseous fuels may be handled by reference to it. Its Chinese classification is J91 and its international classification 27.020. Among the standards it quotes are GB 4556, GB/T 6072.1 and GB 18047.

JB/T 11036-2010 falls under ICS 27.020, in the field of energy and heat transfer engineering.

This catalogue holds 276 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 725

GB/T 726

GB/T 1147.1

GB/T 1147.2

GB/T 1859

GB/T 2828.1

GB/T 3821

GB 4556

GB/T 6072.1

GB/T 6072.3

GB/T 6072.7

GB/T 6388

GB/T 8190.1

GB/T 8190.4

GB/T 10398

GB 11174

GB 14023

GB 15739

GB 17820

GB 18047

GB 19159

GB 20651.1

GB/T 21404

JB/T 5135.1

JB/T 5135.2

JB 8890

JB/T 9774

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test

GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise

JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors

JB/T 11323-2025 — Small and medium power diesel engine - Reliability assessment method

JB/T 10629-2025 — Gas Engine - General Technical Specification and Test Method

JB/T 11014-2025 — General gasoline engine sealing performance - Technical requirements and test methods

6 Classification and status

International classification (ICS): 27.020

Chinese Standard Classification (CCS): J 91

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 15739 · JB 8890

Similar standards

How to Download JB/T 11036-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11036-2010

$135.00