JB/T 9774-2005Small and medium power internal combustion engines - Cleanliness limits (English PDF)
中小功率内燃机 清洁度限值
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9774-2005 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 14, 2005
Implementation date
August 1, 2005
Scope
JB/T 9774-2005 is the English-translated version of 中小功率内燃机 清洁度限值.
JB/T 9774-2005 is the Chinese machinery industry standard covering small and medium power internal combustion engines - Cleanliness limits. It was issued on 14 February 2005 and has been in force since 1 August 2005, replacing JB/T 9774-1999.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2005 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 9774-2005
National Standard of the People's Republic of China
- Replacing
- JB/T 9774-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 9774-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 February 2005 and has been in force since 1 August 2005.
It replaces the earlier edition JB/T 9774-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 9774-2005 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 9774-1999 (earlier edition)
Standards on related subjects:
GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise
JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors
JB/T 5135.3-2025 — General gasoline engine - Part 3: Reliability and durability test and evaluation method
JB/T 5135.2-2025 — General gasoline engine - Part 2: Bench performance test method
JB/T 5135.1-2025 — General Purpose Gasoline Engines - Part 1: Technical Specifications
5 Classification and status
Chinese Standard Classification (CCS): J 91
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 12740-2016Remanufactured internal combustion engines - Crankshaft process specifications
- JB/T 11482-2013Diesel engines for speedboats - Specifications
- QC/T 229-2013Technical specifications for rotor oil pumps of motorcycles and mopeds
- QC/T 916-2013Technical specifications for mono-fuel dimethyl ether engines of heavy-duty vehicles
- JB/T 9753.1-2011Internal combustion engines - Cylinder heads and cylinder blocks - Part 1: Cast iron cylinder blocks - Specifications
- JB/T 11036-2010Single-cylinder gas engines - Technical requirements and test methods
Similar standards
Editions of JB/T 9774
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9774-2005 | Small and medium power internal combustion engines - Cleanliness limits | current edition | Current |
| JB/T 9774-1999 | Small and medium power internal combustion engines - Cleanliness limits | previous edition | Superseded |
This page sells the current edition, JB/T 9774-2005. Earlier editions are listed for reference only.
How to Download JB/T 9774-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 9774-2005
$105.00