JB/T 9753.1-2011Internal combustion engines - Cylinder heads and cylinder blocks - Part 1: Cast iron cylinder blocks - Specifications (English PDF)
内燃机 气缸盖与机体 第1部分：铸铁机体 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9753.1-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 9753.1-2011 is the English-translated version of 内燃机 气缸盖与机体 第1部分：铸铁机体 技术条件.
JB/T 9753.1-2011 is the Chinese standard "Internal combustion engines - Cylinder heads and cylinder blocks - Part 1: Cast iron cylinder blocks - Specifications".
Its main clauses are listed in the table of contents below: 6 clauses in all. The headings are those of the standard itself, taken from its official Chinese edition.
The English translation supplied on purchase carries the full text of every clause and sub-clause.
Found what you need?
Document preview — JB/T 9753.1-2011
National Standard of the People's Republic of China
- ICS
- 27.020
- Replacing
- JB/T 9753-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Technical requirements
- 4 Inspection methods
- 5 Inspection rules
- 6 Marking, packaging, transport and storage
What this standard covers
This standard specifies the internal combustion engine cast iron body's technical requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to less than or equal to 200mm diameter cylinder reciprocating internal combustion engine with cast iron body.
Document data
International classification (ICS): 27.020.
Chinese classification (CCS): J92.
Estimated length of the Chinese original: 10,121 words.
Supersedes the earlier edition JB/T 9753-1999.
Standards quoted by this document
GB/T 197; GB/T 1031; GB/T 1184-1996; GB/T 1800.1; GB/T 1958; GB/T 2828.1; GB/T 2829; GB/T 3821; GB/T 10095; GB/T 10610; JB/T 5082.7; JB/T 9753.3; JB/T 9774
1 Scope
2 Normative references
3 Technical requirements
4 Inspection methods
5 Inspection rules
6 Marking, packaging, transport and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 197General purpose metric screw threads -- Tolerances
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.1Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
- GB/T 1958Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 10095
Similar standards
Editions of JB/T 9753.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9753.1-2011 | Internal combustion engines - Cylinder heads and cylinder blocks - Part 1: Cast iron cylinder blocks - Specifications | current edition | Current |
| JB/T 9753-1999 | Internal combustion engines - Cylinder heads and cylinder blocks - Part 1: Cast iron cylinder blocks - Specifications | previous edition | Superseded |
This page sells the current edition, JB/T 9753.1-2011. Earlier editions are listed for reference only.
How to Download JB/T 9753.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10095.1-2022 — Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
GB/T 10095.2-2023 — Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
Secure payment via Stripe
Payments accepted
JB/T 9753.1-2011
$209.00