GB/T 4111-2013Test methods for the concrete block & brick (English PDF)
混凝土砌块和砖试验方法
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 4111-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
September 1, 2014
Scope
GB/T 4111-2013 is the English-translated version of 混凝土砌块和砖试验方法.
GB/T 4111-2013 is the Chinese national standard covering test methods for the concrete block & brick. It was issued on 31 December 2013 and has been in force since 1 September 2014, replacing GB/T 4111-1997.
The document is under the responsibility of the China Building Materials Federation. This page is published from the official record of the 2013 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 4111-2013
National Standard of the People's Republic of China
- ICS
- 91.060.10
- Classification
- Q 15
- Replacing
- GB/T 4111-1997
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 3.1 General Requirements
- 4 Dimensional Deviation and Appearance Quality
- 5 Compression Strength
- 6 Breaking Strength
- 7 Block Density and Hollow Ratio
- 8 Water Content, Water Absorption and Relative Water Content
- 9 Drying Shrinkage Value
1 Foreword
GB/T 4111-2013 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 31 December 2013 and has been in force since 1 September 2014.
It replaces the earlier edition GB/T 4111-1997, GB/T 4111-1983.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 4111-2013 falls under ICS 91.060.10, in the field of construction materials and building.
This catalogue holds 1,315 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 30 pages
4 Related standards
Other editions:
GB/T 4111-2026 (later edition)
GB/T 4111-1997 (earlier edition)
GB/T 4111-1983 (earlier edition)
Standards on related subjects:
GB/T 8627-2007 — Test method for density of smoke from the burning or decomposition of building materials
GB 20286-2006 — Requirements and mark on burning behavior of fire retarding products and subassemblies in public place
GB/T 20285-2006 — Toxic classification of fire effluents hazard for materials
GB/T 7019-2024 — Test methods for fibre cement products
GB/T 7019-2014 — Test methods for fiber cement products
5 Classification and status
International classification (ICS): 91.060.10
Chinese Standard Classification (CCS): Q 15
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 21144-2023Solid concrete brick
- CJ/T 542-2020Modular system for rainwater storage
- GB/T 39700-2020Treatment and disposal method for boron mud
- GB/T 11945-2019Autoclaved sand-lime solid brick and solid block
- GB/T 36534-2018Foamed concrete blocks filled with ceramsite
- GB/T 36535-2018Autoclaved fly ash hollow bricks and blocks
Similar standards
Editions of GB/T 4111
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 4111-2013 | Test methods for the concrete block & brick | current edition | Current |
| GB/T 4111-1997 | Test methods for the concrete block & brick | previous edition | Superseded |
This page sells the current edition, GB/T 4111-2013. Earlier editions are listed for reference only.
How to Download GB/T 4111-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 4111-2013
$360.00