GB 6222-2025Safety specification for gas of industrial enterprises (English PDF)
工业企业煤气安全规范
This is a limited preview
Buy now to download the full PDF (40 pages)
Need quotation for your management?
Get a formal quotation for GB 6222-2025 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Mandatory
Issue date
October 31, 2025
Implementation date
May 1, 2026
Scope
GB 6222-2025 is the English-translated version of 工业企业煤气安全规范.
GB 6222-2025 is the Chinese standard "Safety specification for gas of industrial enterprises". Its scope clause reads: This document specifies the types of generators, water-gas furnaces, semi-water-gas furnaces, vertical continuous carbonization furnaces, blast furnaces, converters, and coke ovens within industrial enterprise premises.
The design, management, operation, maintenance, repair, and repair of facilities for the production, recovery, purification, transmission, distribution, storage, and use of coal gas from furnaces, ferroalloy furnaces, and other similar equipment.
Emergency response and other safety management and technical requirements are outlined, along with corresponding verification methods. This document applies to gas facilities within industrial plant premises.
This document does not apply to the production of methane, methanol, hydrogen, or other industrial products using coal gas as a raw material, nor to the main and branch pipelines of urban coal gas.
Gas facilities such as courtyard pipe networks and pressure regulating systems. Its clauses include terms and definitions.
Found what you need?
Document preview — GB 6222-2025
National Standard of the People's Republic of China
- ICS
- 13.100
- Classification
- C67
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Preface
- 1.Scope
- 2 Normative References
- 3.Terms and Definitions
- 4.General Requirements
- 5.Gas production, recovery, and purification 4.
- 5.1 Production and purification of producer gas
- 5.2 Production and purification of water gas (including semi-water gas)
- 5.3 Blast Furnace Gas Recovery and Purification
- 5.4 Recovery and Purification of Coke Oven Gas
- 5.5 Production and purification of gas from vertical continuous carbonization furnace
- 5.6 Recovery and Purification of Converter Gas
- 5.7 Recovery and Purification of Ferroalloy Furnace Gas
- 5.8 Leakage test of gas purification facility
- 6 Gas pipelines
- 6.1 Structure and Construction of Gas Pipelines
- 6.2 Laying of Gas Pipelines
- 6.3 Inspection of Gas Pipelines
- 6.4 Testing of Gas Pipelines
- 6.5 Corrosion Protection of Gas Pipelines
- 7.Gas equipment and pipeline accessories
- 7.1 Combustion device
- 7.2 Partitioning and cutting-off devices
- 7.3 Release device
- 7.4 Condensate drain
- 7.5 Steam pipe, nitrogen pipe
- 7.6 Compensator
- 7.7 Explosion relief device
- 7.8 Manholes, handholes and inspection tubes
- 8.Gas pressurization station, mixing station and exhaust fan room
- 8.1 Building Safety Requirements
- 8.2 General Requirements
- 9 Gas holders
- 9.1 General Requirements
- 9.2 Wet gas holder
- 9.3 Dry gas holder
- 10.Operation, inspection, and maintenance of gas facilities
- 10.1 Operation of gas facilities
- 10.2 Inspection and maintenance of gas facilities
- 11 Gas dispatching and protection
- 11.1 Gas Dispatching
- 11.2 Gas Protection Station (Group)
- 11.3 Carbon monoxide concentration monitoring and alarm device
- 12 Emergency Response
- 12.1 General Requirements
- 12.2 Emergency Response to Gas Poisoning Accidents
- 12.3 Emergency Response to Gas Fire Accidents
- 12.4 Emergency Response to Gas Explosion Accidents
- 13 Verification Method
- References
1 Scope
This document specifies the types of generators, water-gas furnaces, semi-water-gas furnaces, vertical continuous carbonization furnaces, blast furnaces, converters, and coke ovens within industrial enterprise premises.
The design, management, operation, maintenance, repair, and repair of facilities for the production, recovery, purification, transmission, distribution, storage, and use of coal gas from furnaces, ferroalloy furnaces, and other similar equipment.
Emergency response and other safety management and technical requirements are outlined, along with corresponding verification methods.
This document applies to gas facilities within industrial plant premises.
This document does not apply to the production of methane, methanol, hydrogen, or other industrial products using coal gas as a raw material, nor to the main and branch pipelines of urban coal gas.
Gas facilities such as courtyard pipe networks and pressure regulating systems.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB 2894 Safety Colors and Safety Signs
GB 4053 (all parts) Safety requirements for fixed steel ladders and platforms
GB 8958 Safety Regulations for Hazardous Operations in Oxygen Deficiency
GB 12358 General Technical Requirements for Gas Detection and Alarm Instruments in the Workplace
GB 16912 Safety Technical Specification for Oxygen and Related Gases Production by Deep Freezing Method
GB 18218 Identification of Major Hazard Installations of Hazardous Chemicals
GB 50016 Code for Fire Protection Design of Buildings
GB 50019 Code for Design of Heating, Ventilation and Air Conditioning of Industrial Buildings
GB 50057 Code for Design of Lightning Protection of Buildings
GB 50058 Design Code for Electrical Installations in Explosive Atmospheres
GB 50140 Code for Design of Fire Extinguisher Configuration in Buildings
GB 50184 Code for Acceptance of Construction Quality of Industrial Metal Piping Engineering
GB 50195 Design Code for Producer Gasification Stations
GB 50235 Construction Specification for Industrial Metal Piping Engineering
GB 50236 Construction Specification for Welding Engineering of On-site Equipment and Industrial Pipelines
GB 50316 Code for Design of Industrial Metal Piping
GB 50683 Standard for Acceptance of Construction Quality of Welding Engineering for On-site Equipment and Industrial Pipelines
GB 55037 General Code for Fire Protection of Buildings
JJG915 Carbon Monoxide Detector Alarm
3 Terms and Definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 40 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 2894Safety colours and safety signs
- GB 8958Safety regulation for working under hazardous condition of the oxygen deficiency
- GB 12358Gas detection and alarm instruments for workplace - General technical requirements
- GB 16912Safety technical regulation for oxygen and relative gases produced with cryogenic method
- GB 18218Identification of major hazard installations for hazardous chemicals
- GB 50016[2018 Edition of GB 50016-2014] Code for Fire Protection Design of Buildings [Code of Design on Building Fire Protection and Prevention]
GB 4053
Cited by
- GB/T 37752.6-2025Industrial furnaces and associated processing equipment - Safety - Part 6: Direct fired thermal processing equipment
- GB/T 45754-2025Technical specifications for equipment of converter primary flue gas dry cleaning and recovery system
- GB 12710-2024Safety specification for the coking plant
- GB/T 37752.5-2024Industrial furnaces and associated processing equipment - Safety - Part 5: Steel strip continuous processing lines
- GB 43049-2023Safety technical conditions for continuous casting machines
- NB/T 11438-2023Operation guideline of circulating fluidized bed gasifiers
Similar standards
Editions of GB 6222
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB 6222-2025 | Safety specification for gas of industrial enterprises | current edition | Current |
| GB 6222-2005 | Safety Code for Gas of Industrial Enterprises | previous edition | Superseded |
This page sells the current edition, GB 6222-2025. Earlier editions are listed for reference only.
How to Download GB 6222-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12358-2006 — Gas monitors and alarms for workplace - General technical requirements
GB 12358-2024 — Gas detection and alarm instruments for workplace - General technical requirements
GB 16912-2008 — Safety technical regulation for oxygen and relative gases produced with cryogenic method
Secure payment via Stripe
Payments accepted
GB 6222-2025
$590.00