JB/T 6409-2008Wet electrostatic precipitators for coal gas (English PDF)
煤气用湿式电除尘器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6409-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 12, 2008
Implementation date
September 1, 2008
Scope
JB/T 6409-2008 is the English-translated version of 煤气用湿式电除尘器.
JB/T 6409-2008 is a recommended Chinese machinery industry standard on the application of the wet electrostatic precipitator to coal gas. It sets the product types and basic parameters, the technical requirements, the test methods and inspection rules, and the provisions for marking, packaging, transport and storage.
The precipitators it applies to are those for the fine dust cleaning of converter gas, of blast furnace gas used in gas turbine power generation and of other producer gas; wet electrostatic precipitators in other industries may refer to it.
Classified J88 and 13.030.40, it replaces JB/T 6409-1992. Among the standards it quotes are GB 150-1998, GB 3836.1, GB/T 13931-2002, GB 50236 and JB/T 10862-2008.
Found what you need?
Document preview — JB/T 6409-2008
National Standard of the People's Republic of China
- ICS
- 13.030.40
- Replacing
- JB/T 6409-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 6409-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 March 2008 and has been in force since 1 September 2008.
It replaces the earlier edition JB/T 6409-1992.
It is one of 2 parts of the JB/T 6409 series.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on the application of the wet electrostatic precipitator to coal gas. It sets the product types and basic parameters, the technical requirements, the test methods and inspection rules, and the provisions for marking, packaging, transport and storage. The precipitators it applies to are those for the fine dust cleaning of converter gas, of blast furnace gas used in gas turbine power generation and of other producer gas; wet electrostatic precipitators in other industries may refer to it. Classified J88 and 13.030.40, it replaces JB/T 6409-1992. Among the standards it quotes are GB 150-1998, GB 3836.1, GB/T 13931-2002, GB 50236 and JB/T 10862-2008.
JB/T 6409-2008 falls under ICS 13.030.40, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
GB 3836.1
GB 4053.1
GB 4053.2
GB 4053.3
GB 4053.4
GB 6222
GB/T 13931-2002 — Methods of performance tests for electrostatic precipitators
GB 50236
JB/T 5908-2007 — Electrostatic precipitators - Sampling inspection and packaging, transport and storage of main components
JB/T 5911-2007 — Technical requirements for welded parts of electrostatic precipitators
JB/T 8536-1997 — Electrostatic precipitators - Technical specifications for mechanical installation
JB/T 9688-2007 — Thyristor-controlled high-voltage power supplies for electrostatic precipitators
JB/T 10862-2008 — Low-voltage control devices for electrostatic precipitators
4 Where this standard sits
It cites 14 standards, among them GB 150-1998, GB/T 13931-2002, JB/T 5908-2007, listed in full above.
It is one part of the JB/T 6409 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 6409.3-1992 — Hot chamber die casting machines - Specifications
Other editions:
JB/T 6409-1992 (earlier edition)
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 5915-2025 — Sequential pulse jet controller for bag filter
JB/T 8532-2023 — Pulse-jet type bag filter
JB/T 6407-2017 — Safety technical specification for design, commissioning, operation and maintenance of electrostatic precipitators
7 Classification and status
International classification (ICS): 13.030.40
Chinese Standard Classification (CCS): J 88
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150-1998Pressure Vessels (Collection GB150.1~150.4-2011)
- GB 3836.1[Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
- GB 4053.1Safety requirements for fixed metal ladders and platform - Part 1: Vertical ladders
- GB 4053.2Safety requirements for fixed metal ladders and platform - Part 2: Inclined ladders
- GB 4053.3Safety requirements for fixed metal ladders and platform - Part 3: Industrial guardrails and platform
- GB 4053.4Fixed steel industrial platform
Similar standards
Editions of JB/T 6409
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6409-2008 | Wet electrostatic precipitators for coal gas | current edition | Current |
| JB/T 6409-1992 | Wet electrostatic precipitators for coal gas | previous edition | Superseded |
This page sells the current edition, JB/T 6409-2008. Earlier editions are listed for reference only.
How to Download JB/T 6409-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
GB 3836.1-1983 — Electrical apparatus for explosive atmosphere--General requirements
GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
JB/T 6409-2008
$135.00