GB 13318-2003General rules for safety and environmental conservation of forging production (English PDF)

3 Terms

4 Hazardous and harmful factors in forging production

5 Working environment of forging production

6 Production materials and residual materials

7 Production installations

8 Forging production processes

9 Technical measures for safety and environmental protection

10 Management measures for safety and environmental protection

Foreword

Clause 9, 5.2 and 10.2 of this standard are mandatory provisions; the remaining provisions are recommended.

This standard replaces GB 13381-1991 (as printed in the original; the replaced standard given on the cover and at the end of this foreword is GB 13318-1991), General rules for safety in production of forging workshops, and at the same time replaces JB/T 6055-1992, Guidelines for environmental protection of forging workshops. Compared with GB 13381-1991, the main changes in this standard are as follows:

- this standard has been drafted in the format required by GB/T 1.1-2000;

- this standard reasonably merges and adjusts the two original standards; the main technical content has been harmonised with the relevant national standards;

- clauses and subclauses have been added to the main technical content on: hazardous factors and harmful factors in forging production; production materials and waste materials; forging production processes; technical measures for safety and environmental protection, and management measures for safety and environmental protection;

- the clause of the original standard on production equipment, auxiliary equipment and tooling has been adjusted and renamed production installations; part of the content of 4.5, 4.6, 4.10, 4.11 and 4.12 of the original standard has been deleted, and content on heating equipment has been added.

Annex A of this standard is a normative annex.

This standard was proposed by the State Administration of Work Safety.

This standard is under the jurisdiction of the National Technical Committee for Standardization of Forging and Pressing.

Drafting organisation of this standard: China First Design and Research Institute of Machinery Industry.

Main drafters of this standard: Chen Zaizhu, Lian Wu, Xi Liangcheng, Li Xinyun.

Previous editions of the standards replaced by this standard:

- GB 13318-1991 and JB/T 6055-1992.

Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on 2003-09-12; implemented from 2004-05-01.