Valid

GB/T 45754-2025Technical specifications for equipment of converter primary flue gas dry cleaning and recovery system (English PDF)

转炉一次烟气干法净化与煤气回收系统设备技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for GB/T 45754-2025 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 30, 2025

Implementation date

September 1, 2025

Scope

GB/T 45754-2025 is the English-translated version of 转炉一次烟气干法净化与煤气回收系统设备技术规范.

GB/T 45754-2025 is the Chinese standard "Technical specifications for equipment of converter primary flue gas dry cleaning and recovery system".

Its scope clause reads: This document specifies the composition, performance parameters and technical requirements of the equipment for the dry purification of primary flue gas and gas recovery system of the converter, and describes the relevant The relevant test methods are specified, and the inspection rules, marking, packaging, transportation and storage are stipulated.

This document applies to the manufacture and installation of equipment for dry purification of primary flue gas and gas recovery system of converter.

Found what you need?

Document preview — GB/T 45754-2025

National Standard of the People's Republic of China

ICS: 13.020
Classification: Z 05

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 System composition and performance parameters
4.1 System composition
4.2 Performance parameters
5 Technical Requirements
5.1 General requirements
5.2 Technical requirements for main mechanical equipment
5.3 Technical requirements for hydraulic equipment
5.4 Technical requirements for electrical equipment
5.5 Safety and environmental protection requirements
6 Test methods
6.1 Withstand voltage test
6.2 No-load test
6.3 Load test
7 Inspection Rules
8 Marking, packaging, transportation and storage
8.1 Sign
8.2 Packaging
8.3 Transportation
8.4 Storage

1 Scope

This document specifies the composition, performance parameters and technical requirements of the equipment for the dry purification of primary flue gas and gas recovery system of the converter, and describes the relevant

The relevant test methods are specified, and the inspection rules, marking, packaging, transportation and storage are stipulated.

This document applies to the manufacture and installation of equipment for dry purification of primary flue gas and gas recovery system of converter.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB/T 191 Pictorial markings for packaging, storage and transportation

GB/T 985.1 Recommended grooves for gas welding, arc welding, gas shielded welding and high energy beam welding

GB/T 985.2 Recommended groove for submerged arc welding

GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components

GB 4053 (all parts) Safety requirements for fixed steel ladders and platforms

GB/T 4830 Industrial Automation Instrument Gas Source Pressure Range and Quality

GB/T 4879 Anti-rust packaging

GB 6222 Gas Safety Regulations for Industrial Enterprises

GB/T 7935 General technical requirements for hydraulic components

GB/T 13283 Accuracy grades of test instruments and display instruments for industrial process measurement and control

GB/T 13931 Test method for performance of electrostatic precipitator

GB/T 14039-2002 Code for solid particle contamination level of hydraulic transmission oil

GB/T 16845 Dust Collector Terminology

GB/T 25133 Flushing method for hydraulic system assembly pipelines

GB/T 37400.1 General technical requirements for heavy machinery Part 1.Product inspection

GB/T 37400.3 General technical requirements for heavy machinery Part 3.Welded parts

GB/T 37400.6 General technical requirements for heavy machinery Part 6.Steel castings

GB/T 37400.8 General technical requirements for heavy machinery Part 8.Forgings

GB/T 37400.9 General technical requirements for heavy machinery Part 9.Cutting parts

GB/T 37400.10 General technical requirements for heavy machinery Part 10.Assembly

GB/T 37400.11 General technical requirements for heavy machinery Part 11.Piping

GB/T 37400.12 General technical requirements for heavy machinery Part 12.Painting

GB/T 37400.13 General technical requirements for heavy machinery Part 13.Packaging

GB/T 37400.16 General technical requirements for heavy machinery Part 16.Hydraulic system

GB/T 41318 Ventilation Muffler

GB 50051 Chimney Design Code

GB 50052 Design specification for power supply and distribution systems

GB 50057 Code for Lightning Protection Design of Buildings

GB/T 45070 | GB/T 40378 | GB/T 40662 | GB/T 47075 | GB/T 33071 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Referenced standards

Normative references

GB 4053

Editions of GB/T 45754

Edition	Title	Revision	Status
GB/T 45754-2025	Technical specifications for equipment of converter primary flue gas dry cleaning and recovery system	current edition	Current

This page sells the current edition, GB/T 45754-2025. Earlier editions are listed for reference only.

How to Download GB/T 45754-2025

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.