GB/T 16845-2017Dust collector - Terminology (English PDF)
除尘器 术语
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for GB/T 16845-2017 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Recommended
Issue date
May 12, 2017
Implementation date
December 1, 2017
Scope
GB/T 16845-2017 is the English-translated version of 除尘器 术语.
GB/T 16845-2017 is the Chinese vocabulary for dust collectors. It defines the basic terms of the field and then the terms of inertial dust collectors, filter dust collectors, wet dust collectors, electrostatic precipitators and compound dust collectors, and closes with a list of references and an index.
The basic clause names and defines the dust collector itself and its main families, from the inertial and porous-layer filter types to the wet scrubber, the electrostatic precipitator working in a high-voltage field and the compound collector that combines two or more separation principles.
It applies to dust collectors, and does not apply to the air filters and household cleaners used in industrial ventilation and air conditioning. It replaces GB/T 16845-2008 and the earlier GB/T 16845.1 to 16845.3-1997, was issued on 12 May 2017 and has applied since 1 December 2017.
Found what you need?
Document preview — GB/T 16845-2017
National Standard of the People's Republic of China
- ICS
- 13.030.40
- Classification
- J 88
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- Preface
- 1 Scope
- 2 Terms and definitions
- 2.1 Basic terminology
- 2.2 Termination of inertia precipitator
- 2.3 Filter Dusters Terminology
- 2.4 Wet dust collector terminology
- 2.5 Electrostatic Precipitator Terminology
- 2.6 Compound Dusters Terminology
- Reference
- Index
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard instead of GB/T 16845-2008 "dust collector terms", compared with GB/T 16845-2008, in addition to editorial changes to the main to change as follows:
- the terms "inertia, filter, wettable" are broken down into the terms "inertial precipitator" and "wetting" (See 2.2, 2.3, 2.4, 2.2 of the 2008 edition);
- Added "filter type dust collector" Related terms: Backflush bag filter (see 2.3.6.2), filter media (see 2.3.6.7), blended filter (See 2.3.6.12), bag (see 2.3.6.12), bag (see 2.3.6.24), (See 2.3.6.33), air separation (see 2.3.6.34), cleaning resistance (see 2.3.6.36), cleaning duration (see 2.3.6.38), cleaning interval (see 2.3.6.39);
- Added "Electrostatic Precipitator" Related Terminology: Low Low Temperature Electrostatic Precipitator (see 2.5.1.1), Low Temperature Electrostatic Precipitator (see 2.5.1.2), High Temperature (See 2.5.1.3), mobile plate electrostatic precipitators (see 2.5.1.4), wet electrostatic precipitators (see 2.5.1.5), number of channels (see 2.5.1.9), the number of electric fields (see 2.5.1.10), the ash-sulfur ratio (see 2.5.1.21), the moving plate (see 2.5.4.3), the sprinkler system (see 2.5.6.1), water film (see 2.5.6.2), spray coverage (see 2.5.6.3), high frequency, high voltage direct current (see 2.5.7.2), constant current DC power supply (see 2.5.7.3), three-phase high voltage DC power supply (see 2.5.7.4), pulse high voltage power supply (see 2.5.7.5), energy saving optimization control System (see 2.5.7.14), razor optimization control system (see 2.5.7.15);
--- modified, improved the relevant terms (see 2.1 ~ 2.6);
--- Remove the "dust tightness", "manufacturing air leakage rate", "conversion leakage rate" and "dust removal unit" and so on (see the 2008 edition of 2.1.14, 2.2.2.6.9, 2.2.2.6.10, 2.2.4.2).
1 Scope
This standard defines the terms of the precipitator, including basic terms, terms of inertial dust collectors, filter-type dust collectors, wet-type dust removal terminology, Electrostatic Precipitator Terminology and Compound Precipitator Terms.
This standard applies to dust collectors.
This standard does not apply to air filters and household cleaners in industrial ventilation and air conditioning.
2 Terms and definitions
2.1 Basic terminology
2.1.1 Dust collector
From the dust-containing gas 1), to collect dust 2).
1) When the dust particles in the dust particle size is small so that the sedimentation rate can be ignored, the dust gas can also be called aerosol, in this standard does not use aerosol glue the word.
2) Dust (solid particles) According to the particle size and source can be called dust particles, dust, soot, etc., in this standard collectively referred to as dust.
2.1.1.1 Inertial dust collector
A dust collector that separates dust from dust-laden gas using inertial forces.
2.1.1.2 Filter
The use of porous media filter to capture dust dust dust dust.
2.1.1.3 Wet dust collector
A precipitator that separates dust from a dust-laden gas by the washing of liquid (usually water).
2.1.1.4 Electrostatic precipitator
The use of high-voltage electric field on the adsorption of dust dust, the dust from the dust separated from the dust collector. That is, in the high voltage electric field, so that the dust suspended in the dust in the gas by the role of gas ionization charge, charged dust in the electric field force, the opposite polarity of the electricity polar motion, and adsorption on the electrode, by rapping, erosion, etc. to fall off from the electrode surface, while the role of gravity in the ash bucket dust.
2.1.1.5 Composite dust collector
Will be two or more than the principle of dust together organically composed of dust collector, such as electric - cyclone dust collector, spray - impulse dust collector, dry - wet one dust collector, electric - bag composite dust collector.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 45754-2025Technical specifications for equipment of converter primary flue gas dry cleaning and recovery system
- GB/T 40514-2021Electrostatic precipitator
- GB 37484-2019Minimum allowable values of energy efficiency and energy efficiency grades for precipitator
- JB/T 13732-2019High temperature electrostatic precipitators
- GB/T 35983-2018General specifications of dust removal system for coal sample preparation
- GB/T 34607-2017Performance assessment of the desulfurization equipment and dust collector for sintering flue gas from iron and steel industry
Similar standards
Editions of GB/T 16845
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 16845-2017 | Dust collector - Terminology | current edition | Current |
| GB/T 16845-2008 | Dust collector - Terminology | previous edition | Superseded |
This page sells the current edition, GB/T 16845-2017. Earlier editions are listed for reference only.
How to Download GB/T 16845-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 16845.1-1997 — Dust collector -- Terminology
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 16845-2017
$415.00