GB/T 34607-2017Performance assessment of the desulfurization equipment and dust collector for sintering flue gas from iron and steel industry (English PDF)

1 Scope

This standard specifies the terminology and definitions of the evaluation of the operation effect of steel sintering flue gas desulphurization and dust removal equipment, general rules, technical requirements for evaluation, evaluation

Method, evaluation procedure and report.

This standard applies to sintered flue gas limestone/lime - gypsum and ammonia and other wet FGD equipment, flue gas circulating fluidized bed method and spin

Rotary spray drying and other semi-dry/dry desulfurization equipment, the operating effect of the evaluation, the use of flue gas dust collector ESP and bag filter operation

Effect evaluation, other similar desulfurization dust removal process can also refer to the implementation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 6719 bag filter technical requirements

GB 8978 Integrated Wastewater Discharge Standard

GB 12348 industrial enterprises boundary environmental noise emission standards

GB/T 13931 electrostatic precipitator performance testing methods

Ambient air - Determination of total suspended particulates - Gravimetric method

Determination of Particulate Matter and Gaseous Pollutants in Exhaust of Fixed Pollution Sources GB/T 16157

GB/T 16845 duster terms

GB 18599 General industrial solid waste storage, disposal site pollutants control standards

GB/T 19001 quality management system requirements

GB/T 19229.1 coal-fired flue gas desulfurization equipment Part 1 flue gas wet desulfurization equipment

GB/T 21508 coal-fired flue gas desulfurization equipment performance testing methods

GB/T 23331 energy management system requirements

GB/T 24001 Environmental Management System Requirements and Guidelines for Use

GB/T 28001 occupational health and safety management system requirements

GB 28662 steel sintering, pellet emissions of industrial air pollutants

DL/T 997 thermal power plant limestone - gypsum wet desulfurization wastewater quality control indicators

HJ/T 42 Determination of nitrogen oxides in exhaust from stationary sources - Ultraviolet spectrophotometry

HJ/T 43 Determination of nitrogen oxides in exhaust from stationary sources - Naphthalene-ethylenediamine hydrochloride spectrophotometry

HJ/T 56 Determination of sulfur dioxide in exhaust from stationary sources - Iodometric method

HJ/T 57 Determination of sulfur dioxide in exhaust from stationary sources - Potentiostatic electrolysis method

HJ/T 75 Stationary Pollutant Source Discharge Continuous Monitoring Technical Specifications (Trial Implementation)

HJ/T 76 Fixed Pollutant Source Discharge Continuous Monitoring System Technical Requirements and Testing Methods (Trial)

HJ/T 77.2 Ambient air and exhaust Dioxins Determination of isotope dilution High-resolution gas chromatography-high resolution mass spectrometry

HJ2001 thermal power plant flue gas desulfurization project technical specifications ammonia method

Technical Specification for Operation and Management of HJ2040 Thermal Power Plant Flue Gas Treatment Facilities […]