GB 16933-1997Acceptance criteria for near surface disposal of radioactive waste (English PDF)
放射性废物近地表处置的废物接收准则
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for GB 16933-1997 in 30 minutes.
Issued by
State Bureau of Technical Supervision
Level / Type
National · Mandatory
Issue date
July 30, 1997
Implementation date
September 1, 1998
Scope
GB 16933-1997 is the English-translated version of 放射性废物近地表处置的废物接收准则.
GB 16933-1997 specifies the basic requirements, acceptance criteria and quality assurance for accepting low and intermediate level radioactive solid waste for near surface disposal, and applies to all waste sent to near surface disposal sites, mainly from nuclear power plants, the nuclear fuel cycle and the decommissioning of nuclear facilities, and by reference to waste from the production and use of radioisotopes.
It was prepared with IAEA Safety Series No. 71 (1985) as its main reference and gives a uniform basis on which each disposal site draws up its own, not less stringent, acceptance document.
The acceptance criteria cover radionuclide content and fissile material, surface radiation level and contamination, mechanical stability, leach resistance, free liquid (less than 1% of the solid waste volume), chemical composition (chelating and complexing agents below 1% by weight, no pyrophoric, explosive or low flash point substances), thermal and radiation stability, fire resistance, microbial degradation, gas generation, packaging containers, a filling ratio above 85% by volume and package marking, largely by reference to GB 12711, GB 11806 and GB 14569.
The quality assurance clause requires programmes and organizations at generators and disposal sites, lists the items checked on acceptance and in destructive or non-destructive sampling inspection, and sets rules for data and document management.
Issued on 30 July 1997, in force from 1 September 1998. Classification: ICS 13.030, CCS F75. The document runs to 5 pages, delivered complete in English translation.
Found what you need?
Document preview — GB 16933-1997
National Standard of the People's Republic of China
- ICS
- 13.030
- Classification
- F75
Issued by: State Bureau of Technical Supervision
Contents
- Foreword
- 1 Scope
- 2 Referenced standards
- 3 Basic requirements
- 4 Waste acceptance criteria
- 5 Quality assurance
3 Basic requirements
4 Waste acceptance criteria
5 Quality assurance
Foreword
This standard was prepared taking as its main reference the International Atomic Energy Agency 1985 Safety Series No. 71 report Acceptance criteria for disposal of radioactive wastes in shallow ground and rock cavities, combined with the specific situation in China.
This standard comprehensively specifies the basic requirements, acceptance criteria and quality assurance for waste acceptance in the near surface disposal of low and intermediate level radioactive waste, thereby providing a uniform basis for waste acceptance at near surface disposal sites in China. Each disposal site shall, in accordance with the provisions of this standard and on the basis of its own site characteristics and disposal facility design requirements, draw up waste characteristic requirements not less stringent than those specified in this standard, as its own operating document for waste acceptance.
This standard was proposed by China National Nuclear Corporation.
Drafting organization of this standard: China Institute for Radiation Protection.
Main drafter of this standard: Feng Shengtao.
Approved by the State Bureau of Technical Supervision on 1997-07-30; implemented on 1998-09-01.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 9132-88Safety requirements for near surface disposal of low and medium level radioactive solid waste
- GB 11806-89Regulations for the safe transport of radioactive material
- GB 12711-91Standard of safety for low and intermediate level solid radioactive waste packages
- GB 14500-93Regulations for radioactive waste management
- GB 14569.1-93Performance requirements for low level radioactive waste form - Cemented waste form
- GB 14569.3-1995Characteristic requirements for solidified waste of low- and intermediate-level radioactive waste - Bitumen solidified waste
GB 8703-88 · GB 14569.2-93
Similar standards
How to Download GB 16933-1997
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14569.3-1995 — Characteristic requirements for solidified waste of low- and intermediate-level radioactive waste - Bitumen solidified waste
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
Secure payment via Stripe
Payments accepted
GB 16933-1997
$249.00