GB 14569.3-1995Characteristic requirements for solidified waste of low- and intermediate-level radioactive waste - Bitumen solidified waste (English PDF)
低、中水平放射性废物固化体性能要求 沥青固化体
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB 14569.3-1995 in 30 minutes.
Issued by
SBTS
Level / Type
National · Mandatory
Issue date
December 13, 1995
Implementation date
August 1, 1996
Scope
GB 14569.3-1995 is the English-translated version of 低、中水平放射性废物固化体性能要求 沥青固化体.
GB 14569.3 is the bitumen counterpart of the cementation standard: it sets what a bituminised low- and intermediate-level radioactive waste form must satisfy — the specific activity limit, and then homogeneity, water content, waste loading, softening point and water resistance.
Bitumen gives a higher waste loading and a lower leach rate than cement but softens with heat and is combustible, which is why the softening point sits among the acceptance criteria.
Issued on 13 December 1995, in force since 1 August 1996; first edition. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the edition it replaces are taken from there.
The clause text, the tables and the numeric limits are not reproduced on this page — they are in the document itself, which is delivered in full in English translation.
Found what you need?
Document preview — GB 14569.3-1995
National Standard of the People's Republic of China
- ICS
- 27.120.30
- Classification
- F 75
Issued by: State Bureau of Technical Supervision
Contents
- Foreword
- 1 Subject content and application scope
- 2 Normative references
- 3 Radioactive specific activity limit of bitumen solidified waste
- 4 Performance requirements
- 4.1 Homogeneity
- 4.2 Water ratio
- 4.3 Waste loading
- 4.4 Softening point
- 4.5 Water resistance
Foreword
This document was issued on 13 December 1995 by the State Bureau of Technical Supervision, and took effect on 1 August 1996.
It is a first edition and replaces no earlier document.
Classification: ICS 27.120.30, CCS F 75.
It is a GB standard without the /T suffix: compliance is mandatory in China.
1 Scope
GB 14569.3 is the bitumen counterpart of the cementation standard: it sets what a bituminised low- and intermediate-level radioactive waste form must satisfy — the specific activity limit, and then homogeneity, water content, waste loading, softening point and water resistance. Bitumen gives a higher waste loading and a lower leach rate than cement but softens with heat and is combustible, which is why the softening point sits among the acceptance criteria. Issued on 13 December 1995, in force since 1 August 1996; first edition. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the edition it replaces are taken from there. The clause text, the tables and the numeric limits are not reproduced on this page — they are in the document itself, which is delivered in full in English translation.
Remaining clauses in the full document
- 2 Normative references
- 3 Radioactive specific activity limit of bitumen solidified waste
- 4 Performance requirements
- 4.1 Homogeneity
- 4.2 Water ratio
- 4.3 Waste loading
- 4.4 Softening point
- 4.5 Water resistance
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of GB 14569.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB 14569.3-1995 | Characteristic requirements for solidified waste of low- and intermediate-level radioactive waste - Bitumen solidified waste | current edition | Current |
This page sells the current edition, GB 14569.3-1995. Earlier editions are listed for reference only.
How to Download GB 14569.3-1995
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14569.1-2026 — Performance requirements for low level radioactive waste form - Cemented waste form
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
Secure payment via Stripe
Payments accepted
GB 14569.3-1995
$95.00