JB/T 12591-2016Low-low temperature electrostatic precipitators (English PDF)
低低温电除尘器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12591-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
June 1, 2016
Scope
JB/T 12591-2016 is the English-translated version of 低低温电除尘器.
JB/T 12591-2016 is a recommended Chinese machinery industry standard for low-low temperature electrostatic precipitators.
It sets out the technical terms and definitions, the make-up of the equipment and its marking, the parameters, the technical requirements, the test methods and the inspection rules, and it also deals with packaging, transport and storage and with installation, commissioning, operation and maintenance.
It applies to the dry, plate-type, horizontal low-low temperature electrostatic precipitator used in coal-fired power plants. Among the standards it quotes are GB 1094.1, GB/T 1184, GB/T 1800.2, GB 12348, GB/T 16845, GB/T 21508, GB/T 24343, GB 50169, HJ 544 and JB/T 5000.12. Its classification is J88 in China and 13.020.40 internationally.
Found what you need?
Document preview — JB/T 12591-2016
National Standard of the People's Republic of China
- ICS
- 13.020.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Composition and designation
- 4.1 Composition
- 4.2 Designation
- 5 Parameters
- 5.1 Basic parameters
- 5.2 Performance parameters
- 5.3 Other parameters
- 6 Technical requirements
- 6.1 Conditions of use
- 6.2 Basic requirements
- 6.3 Requirements on the performance indexes
- 6.4 Requirements on the main parts and components of the body
- 6.5 Requirements on the electrical control part
- 6.6 Painting and appearance
- 6.7 Safety protection
- 6.8 Noise
- 7 Test methods
- 7.1 Performance test
- 7.2 Measurement of the sulphur trioxide concentration
- 7.3 Simulation test of the air flow distribution
- 7.4 Transmission test of the moving plate type
- 7.5 Test of the electrical part
- 7.6 Measurement of the earthing resistance of the dust collector
- 7.7 Noise measurement
- 8 Inspection rules
- 8.1 Inspection of the main parts
- 8.2 Inspection of the welding quality
- 8.3 Inspection of the painting and of the appearance requirements
- 8.4 Other inspections
- 9 Packaging, transport and storage
- 10 Installation
- 11 Safety technical specification for commissioning, operation and maintenance
- Annex A (informative) Method for estimating the ash to sulphur ratio of the flue gas of a coal fired power plant
What this standard covers
This standard specifies the technical specifications and definitions, composition and marking, parameters, technical requirements, test methods, inspection rules for packaging, transportation and storage, installation, commissioning, operation and maintenance of low and low temperature electrostatic precipitators. This standard applies to coal-fired power plant dry, plate, horizontal low-temperature electrostatic precipitator.
Document data
International classification (ICS): 13.020.40.
Chinese classification (CCS): J88.
Estimated length of the Chinese original: 13,173 words.
Standards quoted by this document
GB 1094.1; GB/T 1184; GB/T 1800.2; GB 4053.1; GB 4053.2; GB 4053.3; GB 12348; GBIT 13931; GB/T 16845; GB/T 21508; GB/T 24343; GB 50169; HJ 544; JB/T 501; JB/T 5000.12; JB/T 5845; JB/T 5906; JB/T 5908; JB/T 5909; JB/T 5910; JB/T 5911; JB/T 5913; JB/T 6407
3 Terms and definitions
4 Composition and designation
5 Parameters
6 Technical requirements
7 Test methods
8 Inspection rules
9 Packaging, transport and storage
10 Installation
11 Safety technical specification for commissioning, operation and maintenance
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 1094.1[GB/T 1094.1-2013, Including 2017XG1] Power transformers -- Part 1: General
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.2Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- GB 4053.1Safety requirements for fixed metal ladders and platform - Part 1: Vertical ladders
- GB 4053.2Safety requirements for fixed metal ladders and platform - Part 2: Inclined ladders
- GB 4053.3Safety requirements for fixed metal ladders and platform - Part 3: Industrial guardrails and platform
Similar standards
How to Download JB/T 12591-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 1094.1-2013 — [GB/T 1094.1-2013, Including 2017XG1] Power transformers -- Part 1: General
GB 12348-2008 — Emission standard for industrial enterprises noise at boundary
GB 4053.1-2009 — Safety requirements for fixed steel ladders and platforms - Part 1: Steel vertical ladders
Secure payment via Stripe
Payments accepted
JB/T 12591-2016
$259.00