JB/T 8162-2016Packaging for control motors - Specification (English PDF)
控制电机包装 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8162-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
June 1, 2016
Scope
JB/T 8162-2016 is the English-translated version of 控制电机包装 技术条件.
JB/T 8162-2016 is the Chinese machinery industry specification for the packaging of control motors. It sets terms and definitions, the basic requirements for the packaging, the technical requirements, the test methods and the inspection rules.
What it applies to is the packaging of the various types of control motor and motor combination covered by GB/T 7345-2008, and packaging for other similar motors may be handled the same way.
Among the standards it quotes are GB/T 191, GB 1413, GB/T 2828.1-2012, GB/T 4857.3, GB/T 4857.5, GB/T 4857.9, GB/T 4879-2016, GB/T 6543 and GB/T 9846-2015. It replaces JB/T 8162-1999.
The classifications are K24 in the Chinese scheme and 29.160.30 in the international one.
Found what you need?
Document preview — JB/T 8162-2016
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Replacing
- JB/T 8162-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8162-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 January 2016 and has been in force since 1 June 2016.
It replaces the earlier edition JB/T 8162-1999, JB/T 8162-1995.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese machinery industry specification for the packaging of control motors. It sets terms and definitions, the basic requirements for the packaging, the technical requirements, the test methods and the inspection rules. What it applies to is the packaging of the various types of control motor and motor combination covered by GB/T 7345-2008, and packaging for other similar motors may be handled the same way. Among the standards it quotes are GB/T 191, GB 1413, GB/T 2828.1-2012, GB/T 4857.3, GB/T 4857.5, GB/T 4857.9, GB/T 4879-2016, GB/T 6543 and GB/T 9846-2015. It replaces JB/T 8162-1999. The classifications are K24 in the Chinese scheme and 29.160.30 in the international one.
JB/T 8162-2016 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 1413
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 4122.1
GB/T 4456
GB/T 4768-2008 — Mould-proof packaging
GB/T 4857.3
GB/T 4857.5
GB/T 4857.9
GB/T 4857.10
GB/T 4879-2016 — Rustproof packaging
GB/T 4892
GB/T 5048-1999 — Moistureproof packaging
GB/T 5398
GB/T 6543
GB/T 6544
GB/T 7350-1999 — Waterproof packaging
GB/T 9846-2015 — Plywood for general use
4 Where this standard sits
It cites 19 standards, among them GB/T 1804-2000, GB/T 28281-2012, GB/T 4768-2008, listed in full above.
One other standard in this catalogue cites it: GB/T 44294-2024.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other editions:
JB/T 8162-1999 (earlier edition)
JB/T 8162-1995 (earlier edition)
Standards on related subjects:
GB/T 39553-2020 — General specification for DC servo motors
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
JB/T 3758-2025 — General technical specifications for electric motors for household washing machines
JB/T 8160-2016 — Specification for CK series hollow rotor asynchronous tachogenerators
JB/T 8157-2016 — General specification for small-power single phase series motors
7 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 4122.1Packaging terms - Part 1: Basic
- GB/T 4456Polyethylene blown film for packaging applications
- GB/T 4768-2008Mould-proof packaging
GB 1413
Cited by
- GB/T 16439-2024General specification for AC servo systems
- GB/T 44294-2024General specification for electric spindle motors
- GB/T 10401-2023General specification for permanent magnet direct current torque motors
- GB/T 41913-2022General specification for gyro motor
- GB/T 40206-2021General specification for precision external rotor axial fan
- GB/T 10241-2020General specification for electrical resolver
Similar standards
Editions of JB/T 8162
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8162-2016 | Packaging for control motors - Specification | current edition | Current |
| JB/T 8162-1999 | Packaging for control motors - Specification | previous edition | Superseded |
This page sells the current edition, JB/T 8162-2016. Earlier editions are listed for reference only.
How to Download JB/T 8162-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
JB/T 8162-2016
$275.00