JB/T 10274-2013AC servo motors for NC machine tools - General technical requirements (English PDF)
数控机床交流伺服电动机 通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10274-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10274-2013 is the English-translated version of 数控机床交流伺服电动机 通用技术条件.
JB/T 10274-2013 is a recommended Chinese machinery industry standard that gives the general technical requirements for the alternating-current servo motors used on numerically controlled machine tools.
It sets out the technical requirements for the motor, the test methods by which they are checked, the inspection rules and the provisions for marking, packaging, transport and storage.
The motors it applies to are the AC servo motors of numerically controlled machine tools and of similar applications. It replaces JB/T 10274-2001. Among the standards it quotes are GB 755-2008, GB/T 756-2010, GB/T 757-2010, GB/T 2423.3-2006, GB/T 2828.1-2012, GB 4208-2008, GB/T 7345-2008, GB/T 10069.1-2006, GB/T 10405-2009 and JB/T 8162-1999. Its classifications are J50 and 25.040.20.
Found what you need?
Document preview — JB/T 10274-2013
National Standard of the People's Republic of China
- ICS
- 25.040.20
- Replacing
- JB/T 10274-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 10274-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 10274-2001.
2 Scope
This standard is a recommended Chinese machinery industry standard that gives the general technical requirements for the alternating-current servo motors used on numerically controlled machine tools. It sets out the technical requirements for the motor, the test methods by which they are checked, the inspection rules and the provisions for marking, packaging, transport and storage. The motors it applies to are the AC servo motors of numerically controlled machine tools and of similar applications. It replaces JB/T 10274-2001. Among the standards it quotes are GB 755-2008, GB/T 756-2010, GB/T 757-2010, GB/T 2423.3-2006, GB/T 2828.1-2012, GB 4208-2008, GB/T 7345-2008, GB/T 10069.1-2006, GB/T 10405-2009 and JB/T 8162-1999. Its classifications are J50 and 25.040.20.
3 Normative references
JB/T 10274-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 755-2008
GB/T 756-2010 — Cylindrical shaft extension for rotating electrical machines
GB/T 757-2010 — Conical shaft extension for rotating electrical machines
GB/T 2423.3-2006
GB/T 2423.16-2008
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB 4208-2008
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
GB/T 7346-1998
GB/T 8129-1997
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 10405-2009 — Type designation for electrical machine for automatic control system
JB/T 8162-1999 — Small control motors - Technical specifications for packaging
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10274-2001 (earlier edition)
6 Classification and status
International classification (ICS): 25.040.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 755-2008Rotating electrical machines-Rating and performance
- GB/T 756-2010Cylindrical shaft extension for rotating electrical machines
- GB/T 757-2010Conical shaft extension for rotating electrical machines
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.16-2008Environmental testing - Part 2: Test methods - Test J and guidance: Mould growth
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB 4208-2008
Similar standards
Editions of JB/T 10274
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10274-2013 | AC servo motors for NC machine tools - General technical requirements | current edition | Current |
| JB/T 10274-2001 | AC servo motors for NC machine tools - General technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 10274-2013. Earlier editions are listed for reference only.
How to Download JB/T 10274-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 10405-2009 — Type designation for electrical machine for automatic control system
GB/T 2423.16-2008 — Environmental testing - Part 2: Test methods - Test J and guidance: Mold growth
Secure payment via Stripe
Payments accepted
JB/T 10274-2013
$489.00