JB/T 10276-2013AC servo drive units for NC machine tools - General technical requirements (English PDF)
数控机床交流伺服驱动单元 通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10276-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10276-2013 is the English-translated version of 数控机床交流伺服驱动单元 通用技术条件.
JB/T 10276-2013 is a recommended Chinese machinery industry standard giving the general technical requirements for the alternating-current servo drive unit of a numerically controlled machine tool.
It states the technical requirements for the unit, the test methods used to check it, the inspection rules and the provisions for marking, packaging, transport and storage.
It applies to the AC servo drive units that work with the AC servo motors of such machines. It replaces JB/T 10276-2001. Among the standards it quotes are GB/T 191-2008, GB/T 2423.3-2006, GB 4208-2008, GB 4824-2004, GB 5226.1-2008, GB/T 8129-1997, GB 15760-2004, GB 17625.1-2012 and GB/T 17626.2-2006. Its classifications are J50 and 25.040.20.
Found what you need?
Document preview — JB/T 10276-2013
National Standard of the People's Republic of China
- ICS
- 25.040.20
- Replacing
- JB/T 10276-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 10276-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 10276-2001.
2 Scope
JB/T 10276-2013 is a recommended Chinese machinery industry standard giving the general technical requirements for the alternating-current servo drive unit of a numerically controlled machine tool. It states the technical requirements for the unit, the test methods used to check it, the inspection rules and the provisions for marking, packaging, transport and storage. It applies to the AC servo drive units that work with the AC servo motors of such machines. It replaces JB/T 10276-2001. Among the standards it quotes are GB/T 191-2008, GB/T 2423.3-2006, GB 4208-2008, GB 4824-2004, GB 5226.1-2008, GB/T 8129-1997, GB 15760-2004, GB 17625.1-2012 and GB/T 17626.2-2006. Its classifications are J50 and 25.040.20.
3 Normative references
JB/T 10276-2013 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 191-2008
GB/T 2423.3-2006
GB/T 2423.5-1995
GB/T 2423.10-2008
GB 4208-2008
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 4588.4-1996
GB 4824-2004
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB 5226.1-2008
GB/T 8129-1997
GB 15760-2004
GB 17625.1-2012
GB/T 17626.2-2006
GB/T 17626.4-2008
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10276-2001 (earlier edition)
6 Classification and status
International classification (ICS): 25.040.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.5-1995Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
- GB/T 2423.10-2008Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
- GB/T 4588.2-1996Sectional specification: single and double sided printed boards with plated-through holes
- GB/T 4588.4-1996Sectional specification for rigid multilayer printed boards
GB 4208-2008 · GB 5226.1-2008
Similar standards
Editions of JB/T 10276
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10276-2013 | AC servo drive units for NC machine tools - General technical requirements | current edition | Current |
| JB/T 10276-2001 | AC servo drive units for NC machine tools - General technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 10276-2013. Earlier editions are listed for reference only.
How to Download JB/T 10276-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
Secure payment via Stripe
Payments accepted
JB/T 10276-2013
$470.00