GB/T 10405-2009Type designation for electrical machine for automatic control system (English PDF)

Foreword

This standard replaces GB/T 10405-2001 "Motor control type designation." This standard compared with GB/T 10405-2001 main changes are as follows:

--- According to the product structure for controlling the motor industry are organized original standard has been adjusted.

--- Increasing the motor-products.

--- Removed some out of product.

--- According to GB/T 1.1-2000. provisions "Standardization Guide Part 1 standard structure and write rules" of the standard The formatting has been modified. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Standardization Technical Committee micromotor (SAC/TC2) centralized. This standard was drafted. Xi'an Institute of micro-motor, Hengdian Group to the Motor Co., Ltd., Ningbo vigorously de Transmission Equipment Co. Secretary, Secretary Zhuang Shanghai Electric Co., Ltd., CLP 21. The main drafters of this standard. Tan Ying, He Dongde, Cen Guo-jian, Kim Dong Shao, Huang Haiying. This standard replaces the standards previously issued as follows:

--- GB/T 10405-1989;

--- GB/T 10405-2001. Motor control Type designation

1 Scope

GB/T 10405-2009 is the Chinese national standard on type designation for electrical machine for automatic control system, in the field of electrical engineering. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 30 September 2009 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 February 2010. Classification: ICS 29.160.30, CCS K24. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

This standard specifies the principles should be given control of the motor model to follow. This standard model is suitable for controlling the motor, and combinations thereof are named.

2 Model Name

2.1 General Control of the motor model usually consists of the following four components. Frame Product Code performance parameter code derived code