JB/T 11355-2013General technical requirements for permanent magnet DC motors for massage chairs (English PDF)
按摩椅用永磁直流电动机通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11355-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11355-2013 is the English-translated version of 按摩椅用永磁直流电动机通用技术条件.
Permanent magnet direct current motors for massage chairs are the subject of JB/T 11355-2013, a recommended standard of the Chinese machinery industry.
It classifies the motors and gives general technical requirements for them, with the matching test methods, the inspection rules and the requirements for preparation for delivery and for customer service.
The document is written for the permanent magnet DC motors used in massage chairs. Chinese classification K24 and international classification 29.160.30 apply to it.
Among the standards it quotes are GB/T 1311-2008, GB 4343.1-2009, GB/T 6656-2008, GB/T 10405-2009 and GB 12350-2009.
Found what you need?
Document preview — JB/T 11355-2013
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11355-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Permanent magnet direct current motors for massage chairs are the subject of JB/T 11355-2013, a recommended standard of the Chinese machinery industry. It classifies the motors and gives general technical requirements for them, with the matching test methods, the inspection rules and the requirements for preparation for delivery and for customer service. The document is written for the permanent magnet DC motors used in massage chairs. Chinese classification K24 and international classification 29.160.30 apply to it. Among the standards it quotes are GB/T 1311-2008, GB 4343.1-2009, GB/T 6656-2008, GB/T 10405-2009 and GB 12350-2009.
JB/T 11355-2013 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 1311-2008 — Test procedure for direct current machines
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB 4343.1-2009 — Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 6656-2008 — D.C. ferrite permanent magnet motors
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 10405-2009 — Type designation for electrical machine for automatic control system
GB 12350-2009 — Safety requirements of small-power motors
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 39553-2020 — General specification for DC servo motors
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
JB/T 11358-2013 — Specification for small geared AC motors
JB/T 11357-2013 — Specification for small geared permanent magnet DC motors
JB/T 11356-2013 — General technical requirements for small geared motors
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 1311-2008Test methods for direct current machines
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
Similar standards
How to Download JB/T 11355-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12350-2009 — Safety requirements of small-power motors
GB 4343.1-2009 — Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
JB/T 11355-2013
$225.00