JB/T 12681-2016TYCKK series (IP44) high efficiency high voltage permanent magnet synchronous motors - Specification (English PDF)
TYCKK系列(IP44)高效高压永磁同步电动机 技术条件
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12681-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
June 1, 2016
Scope
JB/T 12681-2016 is the English-translated version of TYCKK系列(IP44)高效高压永磁同步电动机 技术条件.
The subject of JB/T 12681-2016 is the TYCKK series of high-efficiency high-voltage permanent magnet synchronous motors, built to IP44. The standard gives the types of the series, the basic parameters and sizes, the technical requirements, the inspection rules, the signs and packaging, and the warranty period of the machines.
It applies to the general-purpose self-starting motors of the series, and motors derived from it may follow the same requirements. Among the standards it quotes are GB 755-2008, GB/T 997-2008, GB/T 1993-1993, GB/T 4772.2-1999, GB/T 4831-2016, GB/T 10069.1-2006, GB 10069.3, GB 14711 and GB/T 22715-2008. Its classifications are K21 and 29.160.30.
Found what you need?
Document preview — JB/T 12681-2016
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Type, basic parameters and dimensions
- 4 Technical requirements
- 5 Inspection rules
- 6 Marking, packaging and warranty period
- Annex A (normative) Method for determining the efficiency of the high voltage three phase permanent magnet synchronous motor
- A.1 Scope
- A.2 Input power loss analysis method
- Figure 1 Outline drawing of the mounting dimensions of the motor
- Figure A.1 Recommended values of the stray load loss of the motor
- Table 1 Correspondence between frame number, speed and power of the 6 kilovolt motor
- Table 2 Correspondence between frame number, speed and power of the 10 kilovolt motor
- Table 3 Mounting dimensions and tolerances of the 6 kilovolt motor
- Table 4 Mounting dimensions and tolerances of the 10 kilovolt motor
- Table 5 Dimensions and tolerances of the key of the shaft extension
- Table 6 Guaranteed values of the efficiency of the 6 kilovolt motor
- Table 7 Guaranteed values of the efficiency of the 10 kilovolt motor
- Table 8 Tolerances of the guaranteed values of the electrical performance
- Table 9 Interval after the power cut
- Table 10 Limit values of the vibration severity (root mean square value)
- Table 11 Inspection items
- Table 12 Marking of the terminals
What this standard covers
This standard specifies the TYCKK series (IP44) high efficiency permanent magnet synchronous motor type, basic parameters and size, technical requirements, inspection rules, signs, packaging and warranty period. This standard applies to the general purpose of the self-starting TYCKK series (IP44) high efficiency permanent magnet synchronous motor (hereinafter referred to as the motor). All series of motors derived from this series of motors can also be implemented with reference to the various types of motors.
Document data
International classification (ICS): 29.160.30.
Chinese classification (CCS): K21.
Estimated length of the Chinese original: 17,194 words.
Standards quoted by this document
GB/T 191-2008; GB 755-2008; GB/T 997-2008; GB 1971-2006; GB/T 1993-1993; GB/T 4772.2-1999; GB/T 4831-2016; GB/T 4942.1-2006; GB 10068-2008; GB/T 10069.1-2006; GB 10069.3; GB/T 12665-2008; GB 14711; GB/T 22669-2008; GB/T 22715-2008
3 Type, basic parameters and dimensions
4 Technical requirements
5 Inspection rules
6 Marking, packaging and warranty period
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 4772.2-1999Dimensions and output series for rotating electrical machines. Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360
- GB/T 4831-2016Specification for model of rotating electrical motor
- GB/T 10069.1-2006Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB 755-2008 · GB 1971-2006 · GB/T 4942.1-2006 · GB 10068-2008 · GB 10069.3 · GB 14711
Similar standards
How to Download JB/T 12681-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 22669-2008 — Test procedures for three-phase permanent magnet synchronous machines
Secure payment via Stripe
Payments accepted
JB/T 12681-2016
$315.00