GB/T 36059-2018Gravure printing process quality control and inspection methods for paper packaging (English PDF)
纸包装凹版印刷过程质量控制及检验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36059-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 15, 2018
Implementation date
October 1, 2018
Scope
GB/T 36059-2018 is the English-translated version of 纸包装凹版印刷过程质量控制及检验方法.
GB/T 36059-2018 sets out how to control and inspect the quality of the gravure printing process for paper packaging. It gives the terms used, the quality control requirements for the process and the inspection methods, with a normative annex on determining the solids content of ink.
The methods it cites show what is checked: paper and board properties such as dimensions, thickness, moisture, dustiness, roughness, ink absorbency and surface strength; ink fineness and viscosity; colour and reflection density under standard viewing conditions; electronically engraved gravure cylinders and printing rollers; Vickers and Shore hardness; and specimens for volatile organic compound testing.
It applies to the quality control and inspection of gravure printing of paper packaging. It was issued on 15 March 2018 and has applied since 1 October 2018.
Found what you need?
Document preview — GB/T 36059-2018
National Standard of the People's Republic of China
- ICS
- 37.100.01
- Classification
- A 17
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Process Quality Control Requirements
- 5 Inspection Method
- Appendix A (Informative Appendix) Composition and Principle of Eraser
- Appendix B (Normative) Ink Solids Detection Method
- Reference
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms, quality control requirements and inspection methods for the gravure printing process of paper packaging.
This standard applies to the quality control and inspection of the gravure printing process of paper packaging.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 451.1 Determination of Paper and Board Dimensions and Skewness
GB/T 451.3 Determination of the thickness of paper and board
GB/T 462 Determination of Moisture in Analytical Samples of Paper, Board, and Pulp
GB/T 531.1 Test Method for Indentation Hardness of Vulcanized or Thermoplastic Rubbers - Part 1. Shore Hardness Method (Shore Hardness)
GB/T 1541 Determination of dustiness in paper and board
GB/T 4340.1 Vickers hardness test of metallic materials Part 1. Test methods
GB/T 6062 Geometrical Product Specifications (GPS) Surface Structure Profile Method Contact (Stylus) Instrument Nominal Characteristics
GB/T 6342 Determination of Linear Sizes of Foam and Rubber
GB/T 7707-2008 gravure upholstery print
GB/T 7974 Determination of brightness of paper, paperboard and pulp D65 diffuse reflectance factor (diffuse/vertical method, outdoor daylight conditions)
GB/T 9056 metal ruler
GB/T 9573 Rubber and Plastic Hose and Hose Assembly Hose Sizes and Hose Assembly Length Measurement Methods
GB/T 12717-2007 Industrial Acetate Test Methods
GB/T 12911 Determination of absorbency of paper and paperboard inks
GB/T 13217.3 Liquid ink fineness test method
GB/T 13217.4 Liquid ink viscosity test method
GB/T 14216 Determination of Wetting Tension of Plastic Films and Sheets
Application of GB/T 18722 Printing Technology Reflective Density Measurement and Colorimetry in Printing Process Control
GB/T 19437 Printing Technology Spectral Measurement and Colorimetric Calculation
GB/T 22363 Determination of paper and board roughness (air leakage method)
GB/T 22365 Determination of surface strength of paper and board printing
CY/T 3 color evaluation lighting and observation conditions
Technical requirements and inspection methods for CY/T 9 electronic engraving gravure
CY/T 127-2015 Preparation method for volatile organic compound test specimens of printed materials for paper prints
HG/T 2287 printing roller
JB/T 7557 coaxiality error detection
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 451.1Paper and board--Determination of size and deviation
- GB/T 451.3Paper and board - Part 3: Determination of thickness
- GB/T 462Paper, board and pulps - Determination of moisture content of analytical sample
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 1541Paper and board - Determination of dirt
- GB/T 4340.1Metallic materials - Vickers hardness test - Part 1: Test method
Similar standards
How to Download GB/T 36059-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12717-2007 — Test method of acetates for industrial use
GB/T 12911-2025 — Paper and board - Determination of the ink absorbency
GB/T 13217.3-2022 — Test method for fineness of ink
Secure payment via Stripe
Payments accepted
GB/T 36059-2018
$145.00