Valid

GB/T 36064-2018Gravure printing process quality control and inspection methods for plastic flexible packaging (English PDF)

塑料软包装凹版印刷过程质量控制及检验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36064-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 15, 2018

Implementation date

October 1, 2018

Scope

GB/T 36064-2018 is the English-translated version of 塑料软包装凹版印刷过程质量控制及检验方法.

GB/T 36064-2018 is the Chinese national standard for quality control and inspection of the gravure printing process for plastic flexible packaging. It applies to gravure printing of plastic flexible packaging and plastic film labels.

It covers the terms used, the basic process conditions, process control, quality requirements for the printed product and the inspection methods.

Its references bring in packaging films such as BOPP, CPP, polyester and polyamide, gravure inks, solvents such as ethanol, ethyl acetate and isopropyl alcohol, printing cylinders, gravure printing machines and visual inspection systems.

A normative annex gives the method for measuring the deviation rate of oven air pressure, and an informative annex describes checking with a hand-held stroboscope. It was issued on 15 March 2018 and has applied since 1 October 2018.

Found what you need?

Document preview — GB/T 36064-2018

National Standard of the People's Republic of China

ICS: 37.100.01
Classification: A 17

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Quality Control Requirements
5 Inspection Method
Appendix A (Normative) Measurement Method of Oven Wind Pressure Deviation Rate
Appendix B (Informative) Hand-held stroboscope detection method Reference

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the terminology and definition of gravure printing for plastic flexible packaging, process basic conditions, process control, quality requirements, inspection method.

This standard applies to the quality control and inspection of plastic flexible packaging and plastic film label gravure printing production process.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

GB/T 678 Chemical Reagents Ethanol (Anhydrous Ethanol)

GB/T 3728 Ethyl Acetate for Industry

GB/T 4456 Polyethylene blown film for packaging

GB/T 7707 gravure decorating prints

GB/T 7814 Isopropyl alcohol for industrial use

GB/T 10003 General purpose biaxially oriented polypropylene (BOPP) film

GB/T 12027 Test method for dimensional change in heating of plastic films and sheets

GB/T 12717-2007 Industrial Acetate Test Methods

GB/T 13217.4-2008 Liquid ink viscosity test method

Biaxially oriented polyester film for GB/T 16958 packaging

GB/T 20218 biaxially oriented polyamide (nylon) film

GB/T 27740 cast polypropylene (CPP) film

GB/T 28383 web gravure printing machine

Unidirectional heat shrinkable polyester film for BB/T 0070 packaging

CY/T 3 color evaluation lighting and observation conditions

Technical requirements and inspection methods for CY/T 9 electronic engraving gravure

CY/T 157 Print Quality Requirements for Visual Inspection System and Inspection Methods

HG/T 2287 printing roller

HG/T 3939 Industrial Propylene Glycol Methyl Ether

QB/T 1046 gravure plastic film printing ink

QB/T 2024 gravure plastic film composite ink

3 Terms and definitions

The following terms and definitions apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

CY/T 3 · QB/T 1046 · QB/T 2024

Cited by

CY/T 227-2020Application requirements and inspection methods of UV curable ink for flexographic printing

Similar standards

GB/T 33713-2026|GB/T 9851.6-2026|GB/T 18892-2024|GB/T 10073-2021|GB/T 30329.5-2019|GB/T 34690.10-2018

How to Download GB/T 36064-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.