GB/T 40583-2021Technical specification for eco-design product assessment—Battery (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document specifies the evaluation principles, methods and basis for the ecological design of battery products, the basic requirements of manufacturers and product evaluation indicators Require.

This document is applicable to the evaluation of the following battery eco-design products.

---Lithium-ion batteries, including single cells, lithium-ion battery packs and lithium-ion battery systems;

Note 1. The lithium-ion battery pack usually consists of a lithium-ion battery pack, a battery management module (not including a battery control unit), a battery box, and corresponding accessory sets Cheng is a unit that can obtain electrical energy from the outside and can output electrical energy to the outside.

Note 2. Lithium-ion battery system refers to one or more lithium-ion battery packs and corresponding accessories (management system, high-voltage circuit, low-voltage circuit, thermal management equipment). Equipment and mechanical assembly, etc.) constitute an energy storage device.

---Zinc anode primary battery;

---Lead-acid batteries.

Note: The above battery products are collectively referred to as "products" in this document.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 2900.41-2008 Electrotechnical terms primary batteries and accumulators

GB/T 5008.1 Lead-acid batteries for starting Part 1: Technical conditions and test methods

GB 8897.5 Primary batteries Part 5: Safety requirements for aqueous electrolyte batteries

GB/T 16288 Marking of plastic products

GB/T 18287 General specification for lithium ion batteries and battery packs for mobile phones

GB/T 18455 Packaging Recycling Mark

GB 18597 Pollution Control Standard for Hazardous Waste Storage

GB 18599 General Industrial Solid Waste Storage and Landfill Pollution Control Standard

GB/T 19001 Quality Management System Requirements

GB/T 19638.1 Fixed valve-regulated lead-acid batteries Part 1: Technical conditions

GB/T 20155 Determination of mercury, cadmium and lead content in batteries

GB/T 22199.1 Valve Regulated Lead Acid Battery for Electric Moped Part 1: Technical Conditions

GB/T 22473 Lead-acid batteries for energy storage

GB/T 23384 Recyclable label for products and parts

GB/T 24001 Environmental Management System Requirements and Guidelines for Use

GB/T 24040 Environmental Management Life Cycle Assessment Principles and Framework

GB/T 24044 Environmental Management Life Cycle Assessment Requirements and Guidelines

GB/T 24256 General Rules for Product Ecological Design

GB 24427-2021 Limitation requirements for mercury, cadmium and lead content in zinc anode primary batteries