GB/T 16927.2-2026High-voltage test techniques—Part 2:Measuring systems (English PDF)
高电压试验技术 第2部分:测量系统
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 16927.2-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
October 30, 2026
Implementation date
May 1, 2027
Scope
GB/T 16927.2-2026 is the English-translated version of 高电压试验技术 第2部分:测量系统.
GB/T 16927.2-2026 is the Chinese national standard "High-voltage test techniques—Part 2:Measuring systems". It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard and replaces GB/T 16927.2-2013.
Found what you need?
Document preview — GB/T 16927.2-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 16927.2-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.
It replaces the earlier edition GB/T 16927.2-2013, GB/T 16927.2-1997.
It is one of 6 parts of the GB/T 16927 series.
2 Scope Preview
GB/T 16927.2-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 16927.1-1997 — High-voltage test techniques. Part 1: General test requirements
GB/T 16927.1-2011 — High-voltage test techniques -- Part 1: General definitions and test requirements
GB/T 16927.1-2026 — 1: General definitions and test requirements
GB/T 16927.3-2010 — High voltage test techniques -- Part 3: Definitions and requirements for on-site testing
GB/T 16927.4-2014 — High voltage and high current test techniques -- Part 4: Definitions and requirements for test currents and measuring systems
Other editions:
GB/T 16927.2-2013 (earlier edition)
GB/T 16927.2-1997 (earlier edition)
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 18134-2025High-voltage test techniques — Very-fast-front overvoltage measurements
- GB/T 3048.13-2025Test methods for electrical properties of electric cables and wires — Part 13: Impulse voltage test
- GB/T 3048.8-2025Test methods for electrical properties of electric cables and wires - Part 8: AC voltage test
- GB/T 16896.1-2024Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
- GB/T 16896.3-2024Instruments and software used for measurements in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
- GB/T 28182-2024Surge arresters containing series gapped structures with rated voltage 52 kV and less
Editions of GB/T 16927.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 16927.2-2026 | High-voltage test techniques—Part 2:Measuring systems | — | Valid from 2027-05-01 |
| GB/T 16927.2-2013 | High-voltage test techniques - Part 2: Measuring systems | — | Valid until 2027-05-01 |
| GB/T 16927.2-1997 | High-voltage test techniques. Part 2: Measuring systems | — | Obsolete |
This page sells the current edition, GB/T 16927.2-2026. Earlier editions are listed for reference only.
How to Download GB/T 16927.2-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 16927.3-2010 — High voltage test techniques -- Part 3: Definitions and requirements for on-site testing
GB/T 16927.1-1997 — High-voltage test techniques. Part 1: General test requirements
GB/T 16927.4-2014 — High voltage and high current test techniques -- Part 4: Definitions and requirements for test currents and measuring systems
GB/T 16927.2-2026
$255.00