GB/T Standards
Found: 49235 — page 783 of 1026
Valid
GB/T 26103.3-2010 — Curved tooth coupling GCLD
National·Recommended
Instant delivery (0–9 sec)
$105.0015 pages
Valid
GB/T 26103.4-2010 — NGCL curved tooth coupling with brake wheel
National·Recommended
Instant delivery (0–9 sec)
$165.0015 pages
Valid
GB/T 26103.5-2010 — NGCLZ curved tooth coupling with brake wheel
National·Recommended
Instant delivery (0–9 sec)
$165.0015 pages
Valid
GB/T 26104-2010 — WGJ crowned teeth couplings with interconnecting shaft
National·Recommended
Instant delivery (0–9 sec)
$285.0016 pages
Valid
GB/T 26105-2010 — Test of rust preventive oil for rust preventing ability -Electrochemical measurement with wire beam electrode
National·Recommended
Instant delivery (0–9 sec)
$215.0012 pages
Valid
GB/T 26106-2010 — Mechanically deposited coatings of zinc -- Specification and test methods
National·Recommended
Instant delivery (0–9 sec)
$175.0010 pages
Valid
GB/T 26107-2010 — Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method
National·Recommended
Instant delivery (0–9 sec)
$155.007 pages
Valid
GB/T 26108-2010 — Trivalent chromium electroplating - Specification
National·Recommended
Instant delivery (0–9 sec)
$45.0015 pages
Valid
GB/T 26109-2010 — Test of aqueous protective fluids for rust preventing ability - Electrochemical measurement with wire beam electrode
National·Recommended
Instant delivery (0–9 sec)
$155.0015 pages
Valid
GB/T 26112-2010 — Micro-electromechanical system technology - General rules for the assessment of micro-mechanical parameters
National·Recommended
Instant delivery (0–9 sec)
$225.0015 pages
Valid
GB/T 26113-2010 — Micro-electromechanical system (MEMS) technology - General rules for the assessment of micro-geometrical parameters
National·Recommended
Instant delivery (0–9 sec)
$115.0020 pages
Valid
GB/T 26118.1-2010 — Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 1: General principles
National·Recommended
Instant delivery (0–9 sec)
$285.0011 pages
Valid
GB/T 26118.2-2010 — Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 2: Radiation emission measurement procedure
National·Recommended
Instant delivery (0–9 sec)
$145.0010 pages
Valid
GB/T 26118.3-2010 — Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 3: Reduction of radiation by attenuation or screening
National·Recommended
Instant delivery (0–9 sec)
$145.0014 pages
Valid
GB/T 26119-2010 — Green manufacturing - Life cycle assessment for mechanical products - General
National·Recommended
Instant delivery (0–9 sec)
$235.0016 pages
Valid
GB/T 26120-2010 — Pipework -- Stainless steel threaded fittings
National·Recommended
Instant delivery (0–9 sec)
$285.0013 pages
Valid
GB/T 26121-2010 — Flexible rubber joint
National·Recommended
Instant delivery (0–9 sec)
$315.0018 pages
Valid
GB/T 26122.1-2010 — Information technology － Universal multi-octet coded character set - Mongolian nominal characters and presentation forms - 32 Dot matrix font - Part1: Bai Ti
National·Recommended
Instant delivery (0–9 sec)
$240.0013 pages
Valid
GB/T 26122.2-2010 — Information technology - Universal multi-octet coded character set-Mongolian nominal characters and presentation forms - 32 Dot matrix font - Part 2: Xinwen Ti
National·Recommended
Instant delivery (0–9 sec)
$240.0013 pages
Valid
GB/T 26128-2010 — Classification and utilization of scarce and special coal resources
National·Recommended
Instant delivery (0–9 sec)
$105.008 pages
Valid
GB/T 26129-2010 — Contact-type transmitter-receiver headset for fireman
National·Recommended
Instant delivery (0–9 sec)
$225.0015 pages
Valid
GB/T 26137-2010 — Thermodynamic performance testing for blast furnace gas energy recovery turbo-expander
National·Recommended
Instant delivery (0–9 sec)
$225.0015 pages
Valid
GB/T 2614-2010 — Nickel-Chromium/Nickel-Silicon thermocouple wires
National·Recommended
Instant delivery (0–9 sec)
$285.0030 pages
Valid
GB/T 26141.1-2010 — Non-destructive testing -- Qualification of radiographic film digitization systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
National·Recommended
Instant delivery (0–9 sec)
$205.009 pages
Valid
GB/T 26141.2-2010 — Non-destructive testing -- Qualification of radiographic film digitization systems -- Part 2: Minimum requirements
National·Recommended
Instant delivery (0–9 sec)
$85.005 pages
Valid
GB/T 26142.1-2010 — Pneumatic fluid power -- Five-port directional control valves, sizes 18mm and 26mm -- Part 1: Mounting interface surfaces without electrical connector
National·Recommended
Instant delivery (0–9 sec)
$85.005 pages
Valid
GB/T 26142.2-2010 — Pneumatic fluid power -- Five-port directional control valves, size 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector
National·Recommended
Instant delivery (0–9 sec)
$145.007 pages
Valid
GB/T 26143-2010 — Connectors for hydraulic fluid power -- Test methods
National·Recommended
Instant delivery (0–9 sec)
$270.0013 pages
Valid
GB/T 26144-2010 — Liner fluoroplatics for flanged ang wafer steel butterfly valve
National·Recommended
Instant delivery (0–9 sec)
$285.0015 pages
Valid
GB/T 26145-2010 — Drain valve
National·Recommended
Instant delivery (0–9 sec)
$165.0015 pages
Valid
GB/T 26146-2010 — Eccentric semi-ball valve
National·Recommended
Instant delivery (0–9 sec)
$285.0016 pages
Valid
GB/T 26147-2010 — Specification for ball of ball valve
National·Recommended
Instant delivery (0–9 sec)
$225.0022 pages
Valid
GB/T 26151-2010 — E-business invoice message based on XML
National·Recommended
Instant delivery (0–9 sec)
$620.0040 pages
Valid
GB/T 26152-2010 — E-business order message based on XML
National·Recommended
Instant delivery (0–9 sec)
$530.0033 pages
Valid
GB/T 26153.1-2010 — Flexible manufacturing system of off-line programming robots - Part 1: General requirements
National·Recommended
Instant delivery (0–9 sec)
$165.0010 pages
Valid
GB/T 26153.2-2010 — Flexible manufacturing system of off-line programming robots - Part 2: Belt grinding manufacturing system
National·Recommended
Instant delivery (0–9 sec)
$145.0015 pages
Valid
GB/T 26154-2010 — General specifications of assembly robots
National·Recommended
Instant delivery (0–9 sec)
$165.0010 pages
Valid
GB/T 26155.1-2010 — Intelligent electrical actuators for industrial-process measurement and control systems - Part 1: General specification
National·Recommended
Instant delivery (0–9 sec)
$165.0011 pages
Valid
GB/T 26156.1-2010 — Intelligent adjusters for industrial-process measurement and control systems - Part 1: General specification
National·Recommended
Instant delivery (0–9 sec)
$195.0015 pages
Valid
GB/T 26156.2-2010 — Intelligent adjusters for industrial-process measurement and control systems - Part 2: Methods of evaluating the performance
National·Recommended
Instant delivery (0–9 sec)
$165.0010 pages
Valid
GB/T 26158-2010 — Human dimensions of Chinese minors
National·Recommended
Instant delivery (0–9 sec)
$305.0039 pages
Valid
GB/T 26159-2010 — Hand sizing system of Chinese minors
National·Recommended
Instant delivery (0–9 sec)
$165.0015 pages
Valid
GB/T 26160-2010 — Head-face dimensions of Chinese minors
National·Recommended
Instant delivery (0–9 sec)
$105.0015 pages
Valid
GB/T 26161-2010 — Foot sizing system of Chinese minors
National·Recommended
Instant delivery (0–9 sec)
$225.0015 pages
Valid
GB/T 26162.1-2010 — Information and documentation - Records management - Concepts and principles
National·Recommended
Instant delivery (0–9 sec)
$315.0015 pages
Valid
GB/T 26163.1-2010 — Information and documentation -- Records management processes -- Metadata for records -- Part 1: Principles
National·Recommended
Instant delivery (0–9 sec)
$235.0015 pages
Valid
GB/T 26166-2010 — Wall bushings for ±800kV DC power systems
National·Recommended
Instant delivery (0–9 sec)
$225.0015 pages
Valid
GB/T 26168.3-2010 — Electrical insulating materials -- Determination of the effects of ionizing radiation -- Part 3: Classification system for service in radiation environments
National·Recommended
Instant delivery (0–9 sec)
$145.007 pages