Valid

GB/T 26109-2010Test of aqueous protective fluids for rust preventing ability - Electrochemical measurement with wire beam electrode (English PDF)

水基防锈液防锈性能试验 多电极电化学法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26109-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

October 1, 2011

Scope

GB/T 26109-2010 is the English-translated version of 水基防锈液防锈性能试验 多电极电化学法.

GB/T 26109-2010 is the Chinese standard "Test of aqueous protective fluids for rust preventing ability - Electrochemical measurement with wire beam electrode". Its scope clause reads: This standard specifies the evaluation of a water-based anti-rust solution rust resistance test multi-electrode electrochemical test methods, equipment and procedures.

This standard applies to iron-based material in Sheung Shui based organic liquid rust rust performance comparison test. Its clauses include terms and definitions; materials and reagents.

Found what you need?

Document preview — GB/T 26109-2010

National Standard of the People's Republic of China

ICS
25.220.70
Classification
A 29

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 5 Materials and Reagents

1 Scope

This standard specifies the evaluation of a water-based anti-rust solution rust resistance test multi-electrode electrochemical test methods, equipment and procedures.

This standard applies to iron-based material in Sheung Shui based organic liquid rust rust performance comparison test.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard; however, encourage the parties to reach an agreement on this standard is

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 678 chemical reagent alcohol (ethanol)

GB/T 11372 rust term

GB/T 15894 chemical reagents petroleum ether

3 Terms and Definitions

GB/T 11372 and established the following terms and definitions apply to this standard.

3.1 Water-based organic liquid rust

The main use of water-soluble organic corrosion inhibitors and anti-rust liquid, including liquid emulsion rust, rust water and cleaning agents.

3.2 Rust performance rustpreventingability

Rust liquid metal under effective protective film or the ability to prevent corrosion of the metal.

3.3 Multi-electrode electrochemical

By measuring a plurality of electrochemical parameters in a water-based rust liquid, and statistical parameters to evaluate its anti-rust performance.

Principle 4

At room temperature, water-based organic coating film rust corrosion of metals is a electrochemical process. The process encountered resistance from the main polarization

Resistance, followed by the film resistor. The resistance encountered during the greater the corrosion rate of the metal is smaller. Polarization resistance is greater than the resistance of the film

Under the conditions, the greater the measured resistance, anti-rust properties of water-based anti-rust solution, the better. Since the anti-rust solution electrochemical unevenness, a respective electrode resistance

Like it is different. Low resistance region is liquid rust protection weaknesses, its first film under the metal corrosion, direct control of the film's excellent rust resistance inferior. Multi-electrode electrochemical method to evaluate the performance of rust rust film by Statistics low resistance electrode resistance area.

5 Materials and Reagents

5.1 test probe electrode material

Phi = 0.9mm diameter wire model ASTMA853.

5.2 the auxiliary electrode material

Diameter phi = 18mm45

Petroleum ether boiling range 60 °C ~ 90 °C, should be consistent with GB/T 15894 requirements; ethanol should be consistent with GB/T 678 requirements.

GB/T 19355.3-2016 | GB/T 31566-2015 | GB/T 31554-2015 | GB/T 26110-2025 | GB/T 26106-2010 | GB/T 26105-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26109-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26109-2010

$155.00