Valid

GB/T 26112-2010Micro-electromechanical system technology - General rules for the assessment of micro-mechanical parameters (English PDF)

微机电系统(MEMS)技术 微机械量评定总则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26112-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

October 1, 2011

Scope

GB/T 26112-2010 is the English-translated version of 微机电系统(MEMS)技术 微机械量评定总则.

GB/T 26112-2010 is the Chinese standard "Micro-electromechanical system technology - General rules for the assessment of micro-mechanical parameters". Its scope clause reads: This standard specifies the basic principles of micro-mechanical assessment of the amount of assessment factors, assessment procedures, evaluation methods and assessment rules.

This standard applies to enterprises, research institutions, testing organizations engaged in MEMS technology and product research, design, production, testing and use. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 26112-2010

National Standard of the People's Republic of China

ICS
31.200
Classification
L 55

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Micromechanical amount of micro-mechanicalparameters
  • 3.2 Microdisplacement Microscaledisplacement
  • 3.3 Vibration
  • 3.4 Residual Stress
  • 3.5 Stress gradient

1 Scope

This standard specifies the basic principles of micro-mechanical assessment of the amount of assessment factors, assessment procedures, evaluation methods and assessment rules.

This standard applies to enterprises, research institutions, testing organizations engaged in MEMS technology and product research, design, production, testing and use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the edition are not applicable to the present file. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 26111 micro-electromechanical systems (MEMS) technology terms

3 Terms and Definitions

GB/T 26111 and defined by the following terms and definitions apply to this document.

3.1 Micromechanical amount of micro-mechanicalparameters

It refers to all the micro-mechanical nature and status of the relevant physical quantities, including geometry, flow, temperature, acoustics, mechanical and physical exercise;

Since the geometry, flow, temperature, acoustic and other physical quantities for a special classification, it refers to the amount of micro-mechanical displacement, velocity, acceleration, vibration

Motion parameters and other characteristics, and characteristics associated with the movement of the mechanical parameters.

3.2 Microdisplacement Microscaledisplacement

Description of particle in the micron-scale changes in the physical location, its size is equal to a straight line from the starting point to the end point, the direction from the starting point end.

Note 1. micro structure under the conditions subject to certain incentives will produce changes in the position, change in position, there are two typical forms of translation and rotation, corresponding bit line

Shift and angular displacement.

Note 2. If the micro-structure of the substrate as a reference plane, and the plane parallel to the reference plane displacement of plane displacement, otherwise known plane displacement.

3.3 Vibration

Reciprocating movement of the object. In the direction of the reciprocating motion can be divided into line vibration and angular vibration. Evaluation of the vibration characteristics of microstructures main package

Comprising. vibration amplitude, resonance frequency, vibration mode, the quality factor.

3.4 Residual Stress

After the micro-machining process is completed, there is no external force, the internal micromechanical structure and balance remaining stress, called residual

Stress is the combined effects of stress and external stress and thermal stress.

3.5 Stress gradient

Micromechanical structure due to residual non-uniform distribution of residual stress in the thickness direction, suspended micromechanical structures in the lower portion of the sacrificial layer after release

GB/T 46280.2-2025 | GB/T 43770-2024 | GB/T 15651.7-2024 | GB/T 15879.613-2026 | GB/T 15879.603-2026 | GB/T 26113-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26112-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26112-2010

$225.00