GB/T 26103.5-2010NGCLZ curved tooth coupling with brake wheel (English PDF)
NGCLZ型带制动轮鼓形齿式联轴器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26103.5-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 10, 2011
Implementation date
October 1, 2011
Scope
GB/T 26103.5-2010 is the English-translated version of NGCLZ型带制动轮鼓形齿式联轴器.
GB/T 26103.5-2010 is the Chinese standard "NGCLZ curved tooth coupling with brake wheel".
Its scope clause reads: This section GB/T 26103 specifies the type NGCLZ type with brake drum gear coupling (hereinafter referred to as the coupling), basic Main parameters and dimensions, technical requirements, inspection rules, marking, packaging and storage and other content.
This section applies to shafting coupling two horizontal coaxial, and two-axis compensation with a certain relative displacement performance NGCLZ belt Brake drum gear coupling, the working environment temperature -20 °C ~ 80 °C, nominal torque is transmitted 0.63kN · m ~ 125kN · m. Its clauses include types, basic parameters and the main dimensions.
Found what you need?
Document preview — GB/T 26103.5-2010
National Standard of the People's Republic of China
- ICS
- 21.120.20
- Classification
- J 19
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Types, basic parameters and the main dimensions
- 3.2 The basic parameters and the main dimensions
- 3.4 mark
1 Scope
This section GB/T 26103 specifies the type NGCLZ type with brake drum gear coupling (hereinafter referred to as the coupling), basic
Main parameters and dimensions, technical requirements, inspection rules, marking, packaging and storage and other content.
This section applies to shafting coupling two horizontal coaxial, and two-axis compensation with a certain relative displacement performance NGCLZ belt
Brake drum gear coupling, the working environment temperature -20 °C ~ 80 °C, nominal torque is transmitted 0.63kN · m ~ 125kN · m.
2 Normative references
The following documents contain provisions which, through reference GB/T 26103 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 3852 and the coupling shaft hole coupling type and size
GB/T 11352 Carbon steel castings for general engineering purposes (GB/T 11352-2009, ISO 3755.1991, ISO 4990.2003,
MOD)
GB/T 26103.1-2010 GIICL type drum gear coupling
3 Types, basic parameters and the main dimensions
3.1
NGCLZ type with brake drum gear coupling structure, there are two types. A and B, Figure 1 and Figure 2.
3.2 The basic parameters and the main dimensions
A-type and B-type coupling parameter and main size should be consistent in Figure 1, Figure 2 and Table 1, the provisions of.
3.3
coupling and shaft hole coupling type and size should be consistent with the provisions of GB/T 3852's. Its keyway types are A, B, B1, C, D type. Shaft hole
Type combination. Y ,Z , J
3.4 mark
3.4.1
coupling marking method shall comply with GB/T 3852's.
3.4.2
tag example.
Example 1. Actor. Z-type shaft hole, C-type keyway, dZ = 50mm, L = 84mm; driven end. Y type shaft hole (short series), A-type keyway, d2 = 55mm,
L = 84mm of NGCLZ5 type with brake drum gear coupling, mark it as.
NGCLZ5 coupling ZC50 × 8455 × 84 GB / T 26103.5-2010
Example 2. active side. Y type shaft hole, B type key, d1 = 80mm, L = 172mm; driven end. Y type shaft hole (short series), A-type keyway, d2 = 90mm,
L = 132mm. Brake wheel diameter phi600mm of NGCLZ10 type with brake drum gear coupling, mark it as.
NGCLZ10 coupling B80 × 17290 × 132 × phi600 GB / T 26103.5-2010
GB/T 37718-2019 | GB/T 5014-2017 | GB/T 5015-2017 | GB/T 26103.1-2011 | GB/T 26103.4-2010 | GB/T 26103.3-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26103.5-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26103.1-2010 — Curved tooth coupling GIICL
GB/T 26103.3-2010 — Curved tooth coupling GCLD
GB/T 26103.4-2010 — NGCL curved tooth coupling with brake wheel
Secure payment via Stripe
Payments accepted
GB/T 26103.5-2010
$165.00