GB/T 26118.2-2010Safety of machinery -- Assessment and reduction of risks arising from radiation emitted by machinery -- Part 2: Radiation emission measurement procedure (English PDF)

Foreword

GB/T 26118 Safety of Machinery - Assessment and Reduction of Risks Arising from Radiation

Emitted by Machinery consists of the following three parts:

---Part 1: General Principles;

---Part 2: Radiation Emission Measurement Procedure;

---Part 3: Reduction of Radiation by Attenuation or Screening.

This is Part 2 of GB/T 26118.

This Part was drafted in accordance with the rules provided in GB/T 1.1-2009.

This Part identically adopts the European Standard EN 12198-2:2002 Safety of Machinery -

Assessment and Reduction of Risks Arising from Radiation Emitted by Machinery - Part 2:

Radiation Emission Measurement Procedure (English version).

This Part identically translates EN 12198-2:2002. For ease of use, this Part makes the following

editorial modifications:

---"this Part" is used to replace "this European Standard";

---The EN Foreword is deleted, and the Foreword is re-written;

---The introduction of Normative References is modified in accordance with GB/T 1.1-

2009, and the standards cited in EN 12198-2:2002 are modified into the corresponding

national standards;

---The normative reference EN 1070 is deleted;

---"(see EN 292-1:1991, 1.5.10 of Appendix A)" is deleted from Chapter 4;

---Appendix ZA is deleted.

In this Part, Appendix A is informative.

This Part was proposed by and shall be under the jurisdiction of National Technical Committee

208 on Mechanical Safety of Standardization Administration of China (SAC/TC 208).

The drafting organizations of this Part: Regio Packaging Food Machinery Co., Ltd.; Shenzhen

Center Testing International Group Co., Ltd.; China Machinery Productivity Promotion Center;

Optomechanical and Electrical Engineering Research Institute of Nanjing Forestry University.

1 Scope

This Part of GB/T 26118 defines basic technology and specifies general procedures for making

and reporting measurements of quantities related to radiation emitted by machinery. It covers

the different radiation emissions as defined in GB/T 26118.1.

This Part applies to machinery as defined in 3.1 of GB/T 15706.1-2007.

2 Normative References

The following documents are indispensable to the application of this document. In terms of

references with a specified date, only versions with a specified date are applicable to this

document. In terms of references without a specified date, the latest version (including all the

modifications) is applicable to this document.

GB/T 4365-2003 Electrotechnical Terminology - Electromagnetic Compatibility (IEC 60050-

161:1990, IDT)

GB/T 2900.60-2002 Electrotechnical Terminology - Electromagnetism (IEC 60050-121:1998,

EQV)

GB/T 2900.61-2008 Electrotechnical Terminology - Physics and Chemistry (IEC 60050-

111:1996, MOD)

GB 23821-2009 Safety of Machinery - Safety Distances to Prevent Hazard Zones being

Reached by Upper and Lower Limbs (ISO 13857:2008, IDT)

GB/T 26118.1-2010 Safety of Machinery - Assessment and Reduction of Risks Arising from

Radiation Emitted by Machinery - Part 1: General Principles

IEC 60050-881:1983 International Electrotechnical Vocabulary - Chapter 881: Radiology and

Radiological Physics

3 Terms and Definitions

What is defined in GB/T 15706.1 and GB/T 26118.1-2010, and the following terms and

definitions are applicable to this document.

emissions.