Valid

GB/T 26119-2010Green manufacturing - Life cycle assessment for mechanical products - General (English PDF)

绿色制造 机械产品生命周期评价 总则

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26119-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

October 1, 2011

Scope

GB/T 26119-2010 is the English-translated version of 绿色制造 机械产品生命周期评价 总则.

GB/T 26119-2010 is the Chinese standard "Green manufacturing - Life cycle assessment for mechanical products - General". Its scope clause reads: This standard specifies the general requirements for mechanical life cycle assessment framework and basic principles, methods and evaluation reports.

This standard is applicable to mechanical products research and application of life cycle assessment for the evaluation of mechanical product lifecycle stage potential or designated Environmental impact. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 26119-2010

National Standard of the People's Republic of China

ICS
25.010
Classification
J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principles and Framework
  • 5 Evaluation Method
  • 6 Report
  • Appendix A (informative) machinery inventory analysis Example
  • Annex B (informative) Example of calculation results of 14 types of parameters
  • References

1 Scope

This standard specifies the general requirements for mechanical life cycle assessment framework and basic principles, methods and evaluation reports.

This standard is applicable to mechanical products research and application of life cycle assessment for the evaluation of mechanical product lifecycle stage potential or designated

Environmental impact.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 24040-2008 Environmental management - Life cycle assessment - Principles and framework

GB/T 24044-2008 Environmental management - Life cycle assessment - Requirements and guidelines

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Lifecycle

Mechanical products obtained from raw materials to product design, production, packaging, transportation, use, recycling and eventual disposal of the whole process.

3.2 Life Cycle Assessment lifecycleassessment (LCA)

Product lifecycle mechanical system input, output and the compilation and evaluation of potential environmental impacts.

3.3 Life cycle inventory analysis lifecycleinventoryanalysis (LCI)

Life Cycle Assessment of mechanical products throughout the life cycle of the input and output stages of compilation and quantification.

3.4 Life cycle inventory analysis lifecycleinventoryanalysisresult (LCIresult)

Life cycle inventory results accordingly through the system boundary flow of energy and material flow are classified as affecting life cycle

The starting point for evaluation.

[GB/T 24040-2008, the definition 3.24]

3.5 Life Cycle Impact Assessment lifecycleimpactassessment (LCIA)

LCA understand and evaluate the potential environmental production system in the entire product life cycle affect the size and importance stage.

[GB/T 24040-2008, the definition 3.4]

3.6 Life cycle interpretation

Life cycle assessment in accordance with the provisions of the inventory analysis of the purpose and scope of the requirements and (or) the results of the evaluation to assess the impact to form

GB/T 26641-2021 | GB/T 23901.5-2019 | GB/T 23906-2009 | GB/T 19799.4-2026 | GB/T 19799.1-2026 | GB/T 18258-2026 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26119-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26119-2010

$235.00