GB/T 26159-2010Hand sizing system of Chinese minors (English PDF)
中国未成年人手部尺寸分型
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26159-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
July 1, 2011
Scope
GB/T 26159-2010 is the English-translated version of 中国未成年人手部尺寸分型.
GB/T 26159-2010 sets out the hand size system for Chinese minors, giving the hand size types for the age range of 4 to 17 years together with the method for calculating the dimensions of other parts of the hand.
Clause 1 states that it applies to the design, production and selection of gloves, toys and other articles for minors.
Its contents list names a scope clause, normative references, terms and definitions, clause 4 on the setting of hand size types, clause 5 on the calculation of the size of other parts of the hand and clause 6 on the use of the hand size classification, followed by informative Annex A on the hand measurement scheme, Annex B on the coverage of the hand size types and Annex C on the mean values and standard deviations of hand length and hand breadth, and a bibliography.
Clause 3 defines the measurements used, among them the lengths of the thumb and of the third, fourth and fifth fingers, each taken as the straight line distance from the finger tip to the flexion crease at the metacarpophalangeal joint, the distance from the first web space to the tip of the third finger with the thumb naturally abducted, and the breadth of the thumb joint.
Clause 4 designates a size type by a number and a type, the number standing for hand length in blocks of 10 mm, with the mid value of each block used. The terms and the body measurements rest on GB/T 5703, the basic human body measurements for technical design, which is a modified adoption of ISO 7250-1:2008.
The standard is administered by the national ergonomics standardization technical committee, SAC/TC7, and was drafted by the China National Institute of Standardization with the Academy of Mathematics and Systems Science of the Chinese Academy of Sciences, the Beijing Institute of Clothing, an air force aviation medicine institute and a chemical defence research institute. It was issued on 14 January 2011 and has applied since 1 July 2011.
Found what you need?
Document preview — GB/T 26159-2010
National Standard of the People's Republic of China
- ICS
- 13.180
- Classification
- A 25
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 hand size type setting
- 5 other parts of the hand calculated size
- 6 hand size classification using
- Appendix A (informative) hand measurements Scheme
- Annex B (informative) Hand size type coverage
- Annex C (informative) hand length and hand width mean and standard deviation
- Reference
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This standard gives calculation minors (age 4 to 17 years) Hand size type setting, as well as other parts of the hand size method.
This standard applies to minors, gloves, toys and other supplies the design, production and selection.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5703 for the technical design of the Basic human body measurements (GB/T 5703-2010, ISO 7250-1:2008, MOD)
3 Terms and Definitions
GB/T 5703 and as defined in the following terms and definitions apply to this document.
3.1 Thumb length
Thumb finger points to the proximal metacarpophalangeal joint flexion DERMATOGLYPHICS linear distance.
3.2 Middle finger length
Middle finger points to the proximal metacarpophalangeal joint flexion DERMATOGLYPHICS linear distance.
3.3 Ring finger length
Ring finger point proximal to the metacarpophalangeal joint flexion DERMATOGLYPHICS linear distance.
3.4 Little finger length
Pinkie finger point proximal to the metacarpophalangeal joint flexion DERMATOGLYPHICS linear distance.
3.5 First web space to finger III tip distance
When the thumb naturally abduction, the tiger's mouth of the thumb points to a straight line from the middle finger points.
3.6 Thumb knuckle breadth
Thumb maximum linear distance between the two sides of the joint.
4 Hand size type settings
4.1 Hand size type representation
Hand size type of "number" and "type" means. The "Number" represents hand length, 10mm by sub-block, which is the middle value of each block; "type"
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 26159-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5703-1999 — Basic human body measurements for technological design
GB/T 5703-2010 — Basic human body measurements for technological design
GB/T 5703-2023 — Basic human body measurements for technological design
Secure payment via Stripe
Payments accepted
GB/T 26159-2010
$165.00