GB/T 41320-2022Non-household gas-fired space heater (English PDF)
非家用燃气取暖器
This is a limited preview
Buy now to download the full PDF (33 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41320-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2022
Implementation date
October 1, 2022
Scope
GB/T 41320-2022 is the English-translated version of 非家用燃气取暖器.
GB/T 41320-2022 is the Chinese standard "Non-household gas-fired space heater".
Its scope clause reads: This document specifies the classification and type, structure and material, performance, test method of non-domestic gas heaters (hereinafter referred to as "heaters") law, inspection rules, signs and instructions, packaging, transportation and storage.
This document applies to the use of gas specified in GB/T 13611, the use of single-phase power supply rated voltage not greater than 250V, single burner A heater with a rated heat load not greater than 120kW.
This document does not apply to. a) heaters installed outside and used outside; b) heaters specially designed for process use; c) heaters used in moving transport vehicles.
Found what you need?
Document preview — GB/T 41320-2022
National Standard of the People's Republic of China
- ICS
- 91.140
- Classification
- P 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Classification and Model
- 4.1 Category
- 4.2 Model
- 5 Structure, parts and materials
- 5.1 Structure
- 5.2 Parts
- 5.3 Materials
- 5.4 Special requirements for condensing heaters
- 5.5 Special requirements for portable heaters
- 5.6 Special requirements for direct convection heaters
- 5.7 Electrical construction of heaters using alternating current
- 6 Performance
- 6.1 Stability
- 6.2 Air tightness of gas passage
- 6.3 Heat Load Accuracy
- 6.4 Combustion conditions
- 6.5 Safety devices
- 6.6 Anti-backdraft fume extraction hood
- 6.7 Thermal efficiency
- 6.8 Particular requirements for heaters with combustion fans
- 6.9 Wind resistance
- 6.10 Temperature rise
- 6.11 Operational safety
- 6.12 Electrical requirements for heaters using alternating current
- 6.13 Electromagnetic compatibility safety
- 6.14 NOx pollution
- 7 Test methods
- 7.1 Test conditions
- 7.2 Stability
- 7.3 Air tightness of gas passage
- 7.4 Thermal Load Accuracy
- 7.5 Combustion conditions
- 7.6 Safety devices
- 7.7 Anti-backdraft fume hood
- 7.8 Thermal efficiency
- 7.9 Particular requirements for heaters with combustion fans
- 7.10 Wind resistance
- 7.11 Temperature rise
- 7.12 Operational safety
- 7.13 Electrical requirements for heaters using alternating current
- 7.14 Electromagnetic Compatibility Safety
- 7.15 NOx pollution
- 8 Inspection rules
- 8.1 Factory inspection
- 8.2 Type inspection
- 8.3 Inspection items and unqualified classification
- 9 Signs and Instructions
- 9.1 Signs
- 9.2 Instructions
- 10 Packaging, transport and storage
- 10.1 Packaging
- 10.2 Transport
- 10.3 Storage
- Appendix B (Informative) Schematic Diagram of Heater Structure Classified by Smoke Exhaust Method
- Appendix C (normative) Electromagnetic Compatibility Safety
- Appendix D (normative) NOx pollution
1 Scope
This document specifies the classification and type, structure and material, performance, test method of non-domestic gas heaters (hereinafter referred to as "heaters") law, inspection rules, signs and instructions, packaging, transportation and storage.
This document applies to the use of gas specified in GB/T 13611, the use of single-phase power supply rated voltage not greater than 250V, single burner
A heater with a rated heat load not greater than 120kW.
This document does not apply to.
a) heaters installed outside and used outside;
b) heaters specially designed for process use;
c) heaters used in moving transport vehicles.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Graphical signs of packaging, storage and transportation
GB/T 3280 Stainless Steel Cold Rolled Steel Plate and Strip
GB/T 4208 enclosure protection class (IP code)
GB/T 7306 (all parts) 55° sealing pipe thread
GB/T 7307 55° unsealed pipe thread
GB/T 9124.1 Steel Pipe Flanges Part 1.PN Series
GB/T 9144 Ordinary Thread Preferred Series
GB/T 13611 Classification and basic characteristics of urban gas
GB/T 16411-2008 General test method for household gas appliances
GB 16914-2012 Safety technical conditions for gas burning appliances
GB/T 17626.2-2018 Electromagnetic Compatibility Test and Measurement Technology Electrostatic Discharge Immunity Test
GB/T 17626.4-2018 Electromagnetic Compatibility Test and Measurement Technology Electrical Fast Transient Burst Immunity Test
GB/T 17626.5 Electromagnetic Compatibility Test and Measurement Technology Surge (Shock) Immunity Test
GB/T 17626.6 Electromagnetic Compatibility Test and Measurement Technology Conducted Disturbance Immunity Induced by Radio Frequency Fields
GB/T 17626.11 Electromagnetic Compatibility Test and Measurement Technology Voltage Dips, Short Interruptions and Voltage Change Immunity Test
GB/T 19212.7 Safety Section 7 of Transformers, Reactors, Power Supply Units and Similar Products with Power Supply Voltage of 1100V and Below
Part. Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
GB 25034-2020 Gas Heating Water Heaters
GB 35844 Bottled LPG Pressure Regulator
GB/T 37499 Automatic and semi-automatic valves, special requirements for safety and control devices for gas burners and burning appliances
GB/T 38693 Special requirements for safety and control devices for gas burners and burning appliances […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 33 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 3280Cold rolled stainless steel plate, sheet and strip
- GB/T 4208Degrees of protection provided by enclosures (IP code)
- GB/T 7307Pipe threads with 55-degree thread angle where pressure-tight joints are not made on the threads
- GB/T 9124.1Steel pipe flanges -- Part 1: PN designated
- GB/T 9144General purpose metric screw threads - Preferable plan
GB/T 7306
Similar standards
How to Download GB/T 41320-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 25034-2020 — Gas-fired heating and hot water combi-boiler
GB 35844-2018 — Pressure regulators for liquefied petroleum gas cylinders
GB/T 13611-2018 — Classification and basic characteristics of city gas
Secure payment via Stripe
Payments accepted
GB/T 41320-2022
$530.00