Valid

GB/T 33601-2017Power grid equipment common model naming specification (English PDF)

电网设备通用模型数据命名规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33601-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 12, 2017

Implementation date

September 1, 2017

Scope

GB/T 33601-2017 is the English-translated version of 电网设备通用模型数据命名规范.

GB/T 33601-2017 fixes how the equipment of a power grid is named in the common model data that systems exchange. It defines a device's natural name, its path name - the grid, plant or line and voltage level it belongs to - and the unique full path name that joins the two.

It then gives the naming rules for: the grid and its regulatory agencies, the plant, the line, the main primary equipment of the grid and of the distribution network, the secondary equipment and the measurements, with an informative annex of examples.

It is written for modelling in a power system's on-line and off-line application systems and for the information they exchange, and cites GB/T 2260, GB/T 31464, DL/T 860 and DL/T 890.301. It was issued on 12 May 2017 and has applied since 1 September 2017.

Found what you need?

Document preview — GB/T 33601-2017

National Standard of the People's Republic of China

ICS: 29.020
Classification: F 21

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
Introduction
1 Scope
2 normative reference document
3 Terms and definitions
4 grid equipment full path name
5 grid and regulatory agencies named
6 factory name
7 line name
8 power grid main power equipment named
9 Distribution of Main Power Equipment in Distribution Network
10 secondary equipment named
11 measurement name
Appendix A (informative) Examples of primary and secondary equipment naming of power grids
References

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

Introduction

To promote the exchange, sharing and use of power grid equipment model data at all levels of power grids and business units, in the implementation of industry standards On the basis of perfect distribution, secondary equipment naming rules, norms and guidance online and offline application system modeling and application of information exchange between the system Force device naming.

1 Scope

This standard specifies the naming rules for power system equipment and general model data for power plant equipment in power plants.

This standard applies to the power system online and offline application system modeling and application of information exchange between systems.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 2260 Code for Administrative Divisions of the People's Republic of China

GB/T 31464 Code of Practice for Power Grid

DL/T 860 substation communication network and system

DL/T 890.301 Energy Management System Application Programming Interface (EMS-API) Section 301: Public Information Model (CIM) Foundation

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 The natural name of the grid equipment

The uniform specification name used by the power system equipment in the operation and management of the power grid.

Note: Naming follows GB/T 31464 and SD240-1987 (2005).

3.2 The path name of the grid device

The description of the attributes of the grid, plant (or line) and voltage level to which the device belongs, in accordance with the rules of the specification.

3.3 The full path name of the grid equipment

The complete name of the device used to exchange and access the grid, that is, the combination of the path name of the device and the natural name of the device, Is unique.

3.4 Feeder

From the substation outlet to another distribution line of the contact switch or another power supply terminal of the actual configuration of the distribution line. [DL/Z1080.2-2007, definition 2.62]

3.5 Medium Voltage Distribution Line

Medium voltage distribution line is from the substation or distribution station (the) outlet interval leads to the next station into the line (or load point or contact open Off).

3.6 Low-voltage distribution line

Low-voltage distribution line refers to the distribution station (the) or rod transformer 400V and below the cable to the end of the user's cable.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Referenced standards

Normative references

DL/T 860

Cited by

Similar standards

GB/T 13869-2026|GB/T 24114.2-2026|GB/T 33589-2026|GB/T 33592-2026|GB/T 33593-2026|GB/T 33603-2026

How to Download GB/T 33601-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.