GB/T 40608-2021Technical requirements for equipment parameters and operating data of power grid (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document specifies the technical requirements for power system electromechanical transient simulation analysis and calculation of power grid equipment model parameters and operating mode data.

This document is applicable to the electromechanical transient simulation analysis and calculation of power systems with voltage levels of 220kV and above. Power system below 220kV The system is used by reference.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 33601 General model data naming specification for power grid equipment

GB 38755 Safety and Stability Guidelines for Power Systems

3 Terms and definitions

The following terms and definitions apply to this document.

4 Abbreviations

The following abbreviations apply to this document. LCC. Grid Commutated Converter (linecommutatedconverter)

PSS. Power System Stabilizer

SVC. Static Var Compensator (staticvarcompensator)

SVG. static var generator (staticvargenerator)

VSC. voltage source converter (voltagesourceconverter)

5 General requirements

5.1 Grid equipment model parameters should include equipment organization information, equipment model measured and nameplate parameters, equipment expandable model and equipment typical Model parameters.