GB/T 26882.2-2024Grain and oil storage—Monitoring and control system of stored-grain condition—Part 2: Slave computer (English PDF)
粮油储藏 粮情测控系统 第2部分:分机
Open the GB/T 26882.2-2024 preview as PDF
This is a limited preview
Buy now to download the full PDF (15 pages)
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 28, 2024
Implementation date
June 1, 2025
Scope
GB/T 26882.2-2024 is the English-translated version of 粮油储藏 粮情测控系统 第2部分:分机.
GB/T 26882.2-2024 is the Chinese national standard covering the unit that sits at the silo end between the sensors and the host computer — the model designation and the classification by communication mode, the hardware interface and the signal transmission, the basic functions of the detection and the measurement-and-control versions, the enclosure protection, electrical safety and anti-interference, the damp heat, vibration and impact tests that a machine mounted on the silo has to survive, and the inspection rules. Part 2 of the GB/T 26882 series, with the general part GB/T 26882.1-2024 and the software part GB/T 26882.3-2024. It replaces GB/T 26882.2-2011, under the National Food and Strategic Reserves Administration. In force from 1 June 2025. Issued on 28 November 2024, it has been in force since 1 June 2025, replacing GB/T 26882.2-2011.
Document preview — GB/T 26882.2-2024
National Standard of the People's Republic of China
- ICS
- 65.040.20
- Classification
- B 20
- Replacing
- GB/T 26882.2-2011
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- PrefaceIII
- IntroductionIV
- 1 Scope1
- 2 Normative references1
- 3 Terms and Definitions1
- 4 Model compilation and classification2
- 4.1 Model compilation2
- 4.2 Classification3
- 5 Technical Requirements3
- 5.1 General requirements3
- 5.2 Operating Environment3
- 5.3 Power supply3
- 5.4 Hardware Interface3
- 5.5 System signal transmission3
- 5.6 Basic functions4
- 5.7 Main technical indicators4
- 5.8 Power supply fluctuation adaptability4
- 5.9 Reliability4
- 5.10 Work Stability4
- 5.11 Enclosure protection performance4
- 5.12 Electrical safety5
- 5.13 Anti-interference performance5
- 5.14 Environmental adaptability5
- 5.15 Structure5
- 5.16 Appearance5
- 5.17 Transportation5
- 6 Test methods5
- 6.1 Environmental test5
- 6.2 Basic function test5
- 6.3 Main technical index test6
- 6.4 Power supply fluctuation adaptability test6
- 6.5 Reliability test6
- 6.6 Working stability test6
- 6.7 Enclosure protection performance test6
- 6.8 Electrical safety test6
- 6.9 Anti-interference test6
- 6.10 High temperature operation and high temperature storage test6
- 6.11 Low temperature operation and low temperature storage test6
- 6.12 Damp heat test6
- 6.13 Vibration test6
- 6.14 Impact test6
- 6.15 Structural inspection6
- 6.16 Appearance Inspection7
- 6.17 Transport test7
- 7 Inspection Rules7
- 7.1 Inspection categories7
- 7.2 Factory Inspection7
- 7.3 Type inspection8
- 8 Marking, packaging, transportation and storage8
- 8.1 Signs8
- 8.2 Packaging8
- 8.3 Transportation9
- 8.4 Storage9
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.
This document is part 2 of GB/T 26882 "Grain and Oil Storage Grain Condition Monitoring and Control System". GB/T 26882 has been published as follows part.
— Part 1: General;
— Part 2: Extension;
— Part 3: Software;
— Part 4: Information exchange interface protocol.
This document replaces GB/T 26882.2-2011 "Grain and oil storage grain condition monitoring and control system Part 2: Extension", and GB/T 26882.2- Compared with 2011, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) The extension product model composition has been changed (see 4.1.1, 4.1.1 of the 2011 edition);
b) The classification by communication mode has been changed (see 4.2.1, 4.2.1 of the 2011 edition);
c) The technical requirements for system signal transmission have been changed (see 5.5, 5.5 of the 2011 edition);
d) Added the basic functions of the detection extension and the measurement and control extension (see 5.6.1 and 5.6.2);
e) The main technical indicators of the extension have been changed (see 5.7, 5.7 of the 2011 edition);
f) The reliability index has been changed (see 5.9, 5.9 of the 2011 edition);
g) The working stability index has been changed (see 5.10, 5.10 of the 2011 edition).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the State Administration of Grain and Material Reserves.
This document is under the jurisdiction of the National Technical Committee on Cereals and Oils Standardization (SAC/TC270).
This document was drafted by: Henan University of Technology, Anhui University of Architecture, Chengdu Bister Technology Co., Ltd., Shandong Jinzhong Technology Group Co., Ltd., Jiangsu Ailon Technology Co., Ltd., Sinograin Chengdu Storage Research Institute Co., Ltd., National Grain and Material Reserves Administration Science Research Institute, Shanghai Dalian Electronic Technology Co., Ltd., Beijing Liangan Technology Co., Ltd., Huaxin Consulting and Design Research Institute Co., Ltd., Shenzhen Zhongruan Yitong Technology Co., Ltd.
The main drafters of this document are: Zhen Tong, Chen Weidong, Ding Wei, Zhao Xiaojun, Zhao Huiyi, Zhu Yuhua, Li Zhihui, Lin Ronghua, Wu Jianjun, Zhang Jiyong, Wang Chunjun, Chen Huadong, Wang Yanyan, Xu Songwei, Li Zengzeng, Lü Zongwang, Zhang Jiasheng, Xu Xiangyu, Yuan Jianghao, Xie Peng, Li Chuancheng, and Zhao Mujie.
The previous versions of this document and the documents it replaces are as follows.
— First published in 2011 as GB/T 26882.2-2011;
— This is the first revision.
Introduction
At present, real-time monitoring of grain conditions through grain condition measurement and control systems has become an indispensable technical means in grain storage operations.
The control system can also cooperate with various grain storage processes to control the grain situation and ensure the storage safety of grain.
The formulation of the "Grain Condition Monitoring and Control System" provides a basis for the production and application of grain condition monitoring and control system products, which is of great significance to improving product quality and enhancing storage application Management efficiency and data sharing are of great significance.
In recent years, with the development of information technology and green grain storage technology, new requirements have been put forward for grain condition monitoring and control systems.
In addition to measuring temperature and humidity, we also added moisture, gas, and stored grain pests, as well as ventilation, air conditioning, and circulation, which are related to grain condition detection results.
The grain storage network has gradually covered the entire storage area. In response to these changes and demands, GB/T 26882- 2011 was revised in due course.
According to the general requirements, hardware, software and information exchange content of grain condition monitoring and control systems, GB/T 26882 is planned to consist of four parts.
— Part 1: General. The purpose is to establish the overall requirements and relevant rules that the grain condition monitoring and control system needs to comply with.
— Part 2: Extension. The purpose is to establish the execution of grain condition detection and grain condition control of the extension of the grain condition measurement and control system placed at the grain silo end.
Technical requirements such as network access.
— Part 3: Software. The purpose is to establish the basic content of the application software functions and reports of the grain condition monitoring and control system.
— Part 4: Information exchange interface protocol. The purpose is to establish the information exchange interface protocol between the extension and the host computer of the grain condition monitoring and control system, and between the extension and the host computer of the grain condition monitoring and control system.
The protocol and related rules for information exchange between the system and other grain depot application systems.
Grain and oil storage grain condition monitoring system Part 2: Extension
1 Scope
This document specifies the model compilation and classification, technical requirements, inspection rules, and marking, packaging, transportation and storage of grain condition monitoring and control system extensions.
The stored content describes the test method of the extension unit of the grain condition monitoring and control system.
This document applies to the grain condition monitoring and control system extension used in grain and oil storage.
2 Normative references
GB/T 191
GB/T 2423.1
GB/T 2423.2
GB/T 2423.3
GB/T 2423.5
GB/T 2423.10
GB/T 2829-2002
GB/T 3482
GB/T 4208
GB 4793.1
GB/T 4798.1-2019
GB/T 4798.2
GB/T 5080.1-2012
GB/T 5080.7
GB/T 6587-2012
GB/T 10111
GB/T 11463
GB/T 17626.2-2018
GB/T 17626.3-2023
GB/T 17626.4-2018
GB/T 17626.5-2019
GB/T 26882.1-2024
GB/T 26882.4
3 Terms and definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB/T 3482Lightning test method for electronic equipments
- GB/T 4208Degrees of protection provided by enclosures (IP code)
- GB/T 6587-2012General specification for electronic measuring instruments
- GB/T 10111Generation of random numbers and procedures applied to sampling inspection for product quality
GB/T 2423.1 · GB/T 2423.2 · GB/T 2423.3 · GB/T 2423.5 · GB/T 2423.10 · GB 4793.1 · GB/T 4798.1-2019 · GB/T 4798.2 · GB/T 5080.1-2012 · GB/T 5080.7 · GB/T 11463 · GB/T 17626.2-2018 · GB/T 17626.3-2023 · GB/T 17626.4-2018 · GB/T 17626.5-2019
Editions of GB/T 26882.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 26882.2-2024 | Grain and oil storage - Monitoring and control system of stored-grain condition - Part 2: Slave computer | current edition | Current |
| GB/T 26882.2-2011 | Grain and oil storage -- Monitoring and control system of stored-grain condition -- Part 2: Slave computer | previous edition | In force |
This page sells the current edition, GB/T 26882.2-2024. Earlier editions are listed for reference only.
How to Buy GB/T 26882.2-2024
- 1Add to cart. Click the "Buy GB/T 26882.2-2024" button on this page. You can add more standards before checkout.
- 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
- 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10111-2008 — Generation of random numbers and procedures applied to sampling inspection for product quality
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
GB/T 1910-2015 — Newsprint
Secure payment via Stripe
Payments accepted
GB/T 26882.2-2024
$260.00