Valid

GB/T 3482-2008Lightning test method for electronic equipments (English PDF)

电子设备雷击试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 3482-2008 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 31, 2008

Implementation date

November 1, 2008

Scope

GB/T 3482-2008 is the English-translated version of 电子设备雷击试验方法.

GB/T 3482-2008 is the Chinese standard "Lightning test method for electronic equipments". Its scope clause reads: This standard specifies the operating voltage of 1000V (AC) or 1500V (DC) of the following electronic devices Lightning test simulation test conditions, test Test circuit and test procedures.

This standard applies to electronic test equipment simulate lightning. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 3482-2008

National Standard of the People's Republic of China

ICS
33.020
Classification
M 40
Replacing
GB/T 3483-1983

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Category
  • 5 Lightning test program
  • 5.2 Test equipment
  • 5.3 2 Initial Detection
  • 5.4 Lightning test
  • 5.5 intermediate detection
  • 5.6 Recovery
  • 5.7 Detection 2 final
  • 6.1 Power Line Lightning test waveforms and severity
  • 6.2 Lightning test waveform signal line 3 and severities
  • 6.3 between the power line and signal line lightning test waveforms and severities
  • 6.4 lightning pulsed magnetic field test
  • 6.5 The test result determination condition
  • 7 analog voltage and current waveforms of lightning
  • 7.1 lightning voltage and current waveforms defined
  • 8 Lightning test circuit
  • 8.1 Lightning test circuit power line and the coupling line ports ---
  • 8.2 Lightning test circuit --- signal line coupling mode and line port
  • 8.3 between the power line and signal line lightning --- test circuit and circuit coupling port

1 Scope

This standard specifies the operating voltage of 1000V (AC) or 1500V (DC) of the following electronic devices Lightning test simulation test conditions, test

Test circuit and test procedures.

This standard applies to electronic test equipment simulate lightning.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 17626.5-1999 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test (idt IEC 61000-4-5.

1995)

GB/T 17626.9-1998 Electromagnetic compatibility - Testing and measurement techniques - Pulse magnetic field immunity test (idt IEC 61000-4-9.

1993)

GB/T 17627.1-1998 part of high-voltage test techniques for low voltage equipment. definitions and test requirements (eqv IEC 61180-1.1992)

3 Terms and Definitions

The following terms and definitions apply to this standard.

3.1

For preventing surges applied to the device under test is not affecting other devices, equipment or system circuit tests.

3.2

To prevent electric shock and is used as part of any of the following wire electrical connection. exposed conductive parts, conductive parts outside the device, total ground line

Or general equipotential connection terminal, grounding, power or artificial neutral ground.

Category 4

Electronic apparatus shown in Figure 1, there is power line, the signal line may be a plurality of multi-species line. According to whether the protective grounding line is divided into class I

And Class II equipment.

Class I equipment. protective grounding line equipment.

II type of equipment. No protective grounding line equipment.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

Editions of GB/T 3482

EditionTitleRevisionStatus
GB/T 3482-2008Lightning test method for electronic equipmentscurrent editionCurrent
GB/T 3483-1983Lightning test method for electronic equipmentsprevious editionSuperseded

This page sells the current edition, GB/T 3482-2008. Earlier editions are listed for reference only.

How to Download GB/T 3482-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 3482-2008

$225.00