GB/T 18185-2014Specification of reliability for hydrologic instruments (English PDF)
水文仪器可靠性技术要求
This is a limited preview
Buy now to download the full PDF (29 pages)
Need quotation for your management?
Get a formal quotation for GB/T 18185-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 8, 2014
Implementation date
January 10, 2015
Scope
GB/T 18185-2014 is the English-translated version of 水文仪器可靠性技术要求.
GB/T 18185-2014 is the Chinese standard "Specification of reliability for hydrologic instruments".
Its scope clause reads: This standard specifies the basic principles of the reliability of the technical design of hydrological instruments, technical requirements, sampling, measurement and verification, and statistical analysis of results Failure determination, test records and reports.
This standard applies to hydrological instruments product research and design, production, test assessment, acceptance, use and so on. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 18185-2014
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- N 93
- Replacing
- GB/T 18185-2000
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 reliability design process and design requirements
- 6 3 Product reliability requirements
- 7 sampling, testing and verification
- 8 results of statistical analysis and fault determination
- 9 Test Record and Report
- Appendix A (normative) the reliability of the design process and design requirements
- Appendix B (normative) Sampling Method
- Annex C (informative) Example 26 sampling plan
- Annex D (informative) reliability estimation and verification method Example
- Appendix E (normative) hydrological instrument reliability test report
- Annex F (normative) hydrological instrument for field use fault statistics
- References
1 Scope
This standard specifies the basic principles of the reliability of the technical design of hydrological instruments, technical requirements, sampling, measurement and verification, and statistical analysis of results
Failure determination, test records and reports.
This standard applies to hydrological instruments product research and design, production, test assessment, acceptance, use and so on.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2689.1 constant stress life testing and accelerated life testing - General
GB/T 2689.2 Life test and acceleration life test charts - Evaluation (Weibull distribution)
GB/T 2689.3 simple linear life testing and accelerated life testing unbiased estimation (Weibull distribution)
GB/T 2689.4 linear best life testing and accelerated life testing unbiased estimation (Weibull distribution)
GB/T 2828.1 count batch inspection sampling plan sampling procedures - Part 1 by acceptance quality limit (AQL) retrieval
GB/T 2829-2002 periodic inspection Sampling procedures and tables (for testing the stability of the production process)
GB/T 2900.13 Electrotechnical terminology credibility and quality of service
Point and interval estimation method GB/T 5080.4-1985 Equipment reliability testing reliability determination tests (exponential distribution)
GB/T 5080.6 Equipment reliability testing constant failure rate assumption validation
GB/T 5080.7-1986 Equipment reliability testing efficiency constant failure rate assumption under the MTBF of the verification test
Inspection program
GB/T 5081 Electronics site reliability, availability and maintainability data collection guidelines
GB/T 7288.1 Equipment reliability testing - Preferred test conditions indoor portable equipment simulation
GB/T 7288.2 Equipment reliability testing - Preferred test conditions for stationary use in weather protected locations Simulation
GB/T 7826 system reliability analysis techniques for failure mode and effects analysis (FMEA) program
GB/T 7827 Reliability Prediction Program
GB/T 7828 Reliability Design Review
GB/T 9359 Basic environmental testing instruments hydrological conditions and methods
GB/T 13264-2008 percent nonconforming small batch count sampling procedures and sample forms
GB/T 15966 hydrologic instrument basic parameters and general technical requirements
GB/T 18522.4 hydrologic instruments - Part 4. Basic requirements of structure
GB 18523 hydrologic instrument safety requirements
GB/T 19677 Terms and symbols for hydrological Instruments
3 Terms and Definitions
GB/T 2900.13, GB/T 19677 and defined by the following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 11828.4-2025Instruments for stage measurement - Part 4:Ultrasonic stage recorder
- GB/T 45892.1-2025Smart water saving management system for water users — Part 1: Guidelines
- GB/T 11828.2-2022Instruments for stage measurement - Part 2:Pressure-type stage gauge
- GB/T 41184.1-2021Measuring instruments for soil moisture evaporation—Part 1:Evaporator of the hydraulic type
- GB/T 11828.1-2019Instruments for stage measurement - Part 1:Float-type stage gauge
- GB/T 19704-2019Display and record of hydrometrical instruments
Similar standards
Editions of GB/T 18185
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 18185-2014 | Specification of reliability for hydrologic instruments | current edition | Current |
| GB/T 18185-2000 | Specification of reliability for hydrologic instruments | previous edition | Superseded |
This page sells the current edition, GB/T 18185-2014. Earlier editions are listed for reference only.
How to Download GB/T 18185-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 18185-2014
$505.00