GB/T 11828.3-2012Instruments for stage measurement -- Part 3: Groundwater stage gauge (English PDF)
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for GB/T 11828.3-2012 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
January 1, 1970
Implementation date
January 1, 1970
Scope
GB/T 11828.3-2012 (Instruments for stage measurement -- Part 3: Groundwater stage gauge) is available as an English-translated PDF.
GB/T 11828.3-2012 — This section GB/T 11828 meter water table specifies the product classifications, technical requirements, test methods, inspection rules, marks, use Brochures, packaging, transportation and storage requirements.
This section applies to hanging hammer, tracking, float, pressure and other types of groundwater level meter.
Found what you need?
Document preview — GB/T 11828.3-2012
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- N 93
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Products
- 4.1 Classification by measuring principle
- 4.2 Classification by recording mode
- 5 Technical requirements
- 5.1 Operating Environment
Foreword
GB/T 11828 "water level measuring instrument" is divided into seven parts.
--- Part 1. float-type water level gauge;
--- Part 2. Pressurized water level gauge;
--- Part 3. groundwater level meter;
--- Part 4. Ultrasonic water level gauge;
--- Part 5. Electronic water gauge;
--- Part 6. Remote measuring water level;
--- Part 7. Level stylus.
This is Part 3 GB/T 11828 in.
Rules in this section in accordance with GB/T 1.1-2009 given draft.
This part of GB/T 19677-2005 "term hydrological instruments and symbols" and other standards consistent with each other on the technical content.
This section proposed by the People's Republic of China Ministry of Water Resources.
This part of the National Technical Committee of Standardization Technical Committee hydrological instruments (SAC/TC119/SC1) centralized.
This section is responsible for drafting unit. MWR hydrological instruments and geotechnical engineering Instrument Quality Supervision, Inspection and Testing Center, Ministry of Water Resources Nanjing Hydraulic water Wen Institute of Automation, Ningbo Beilun Cup China Hydraulic Equipment Co., Hydrology Bureau of the Yellow River Conservancy Commission.
Participated in the drafting of this section. the country's industrial production permit office hydrological instruments and geotechnical engineering Instrument Examination Department.
1 Scope
This section GB/T 11828 meter water table specifies the product classifications, technical requirements, test methods, inspection rules, marks, use Brochures, packaging, transportation and storage requirements.
This section applies to hanging hammer, tracking, float, pressure and other types of groundwater level meter.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 9359-2001 hydrological instruments environmental testing conditions and methods GB/T 9969 General Industrial Product Manual GB/T 13384 mechanical and electrical products packaging General technical conditions GB/T 18185-2000 technical requirements for the reliability of hydrological instruments GB/T 19677-2005 Terms and symbols for hydrological Instruments
3 Terms and Definitions
GB/T 19677-2005 defined and the following terms and definitions apply to this document.
Groundwater level meter groundwaterstagegauge Measurement observation well (hole) in the groundwater level change instruments.
Depth burieddepth
Observation wells (holes) fixed point on the ground to the mouth of the natural vertical distance from the free surface of groundwater.
4 Products
4.1 Classification by measuring principle
Groundwater level meter measuring principle can be divided according to type netsuke, tracking, float, pressure and the like.
4.2 Classification by recording mode
Groundwater level meter according to the recording mode into manual recording, graphic recording, digital storage, comprehensive records.
5 Technical requirements
5.1 Operating Environment
Groundwater level meter should be able to work properly in the following environments.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 9359-2001Basic conditions and methods of environmental test for hydrological instrument
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 18185-2000Specification of reliability for hydrologic instruments
GB/T 19677-2005
How to Download GB/T 11828.3-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 11828.1-2019 — Instruments for stage measurement - Part 1:Float-type stage gauge
Secure payment via Stripe
Payments accepted
GB/T 11828.3-2012
$204.00