GB/T 15968-2008Specifications for remote sensing image plan making (English PDF)
遥感影像平面图制作规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 15968-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 20, 2008
Implementation date
December 1, 2008
Scope
GB/T 15968-2008 is the English-translated version of 遥感影像平面图制作规范.
GB/T 15968-2008 is the Chinese standard "Specifications for remote sensing image plan making". Its scope clause reads: This standard specifies the remote sensing image 1.100000,1.250000,1.500000,1.1000000 plan specifications, accuracy and The basic requirements of the production.
This standard applies to the use of aerospace remote sensing remote sensing image data produced 1.100000,1.250000,1.500000,1.1000000 Image plan. Its clauses include general.
Found what you need?
Document preview — GB/T 15968-2008
National Standard of the People's Republic of China
- ICS
- 07.040
- Classification
- A 79
- Replacing
- GB 15968-1995
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 1 General Provisions
- 5 with the correct image mosaic
- 6 finishing, annotation
- 7 inspection, acceptance
- 8 a plan view of the remote sensing image copied
1 Scope
This standard specifies the remote sensing image 1.100000,1.250000,1.500000,1.1000000 plan specifications, accuracy and
The basic requirements of the production.
This standard applies to the use of aerospace remote sensing remote sensing image data produced 1.100000,1.250000,1.500000,1.1000000
Image plan.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 12340 1.25000 1.50000 1.100000 within topographic map Aerophotogrammetry industry norms
GB/T 13989 national basic scale topographic maps and numbering
GB/T 14511 Map printing specifications
GB/T 18316 digital mapping products inspection and acceptance standards and quality assessment
GB/T 20257.3 national basic scale map drawings - Part 3. 1.25000 1.50000 1.100000 terrain
FIG formula
GB/T 20257.4 national basic scale map drawings - Part 4. 1.250000 1.500000 1000000
Topographical Map
CH1002 mapping products for inspection, acceptance
CH1003 Plotting Product Quality Standards
CH/T 1004 mapping technology design requirements
CH/T 3002 1.10000 1.25000 scale image plan operating procedures
3 General
3.1 Basic requirements
3.1.1 Image Quality
Remote sensing images should plan rich layers, legible, uniform hue, contrast medium; color image fusion should be realistic
Naturally, color balance, color cast and no obvious traces of stitching.
3.1.2 Horizontal Accuracy
The feature point with respect to the vicinity of the control point, the point on the map graticule or kilometer grid points in error satisfies the following requirements.
a) plains, hills, not greater than ± 0.5mm, mountain, mountain not more than ± 0.75mm;
b) areas with particular difficulties can relax terrain category 0.5 times;
c) The use according to user needs and a plan view of remote sensing images, the maximum should not exceed twice in error.
3.1.3 Mapsheet size requirements
FIG profile difference between the actual and theoretical dimensions should not exceed the size of the absolute value specified in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 44348-2024Technical specification for zonation and delimitation of state-level non-commercial forest
- GB/T 42435-2023Technical specification for coastal erosion monitoring and disaster losses evaluation
- GB/T 42639-2023Specification for intertidal zone survey
- LY/T 1955-2022Forest land protection and utilization planning forest land boundary technical regulations
- LY/T 1956-2022Technical regulations for the compilation of county-level forest land protection and utilization planning
- HJ 1176-2021National Ecological Status Survey and Evaluation Technical Specifications-Data Quality Control and Integration
Similar standards
Editions of GB/T 15968
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 15968-2008 | Specifications for remote sensing image plan making | current edition | Current |
| GB 15968-1995 | Specifications for remote sensing image plan making | previous edition | Superseded |
This page sells the current edition, GB/T 15968-2008. Earlier editions are listed for reference only.
How to Download GB/T 15968-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 15968-2008
$135.00