GB/T 45522-2025Specifications for registration of surveying and mapping with unmanned aircraft system (UAS) (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document is proposed by the Ministry of Natural Resources of the People's Republic of China.

This document is under the jurisdiction of the National Technical Committee for Geographic Information Standardization (SAC/TC230).

This document was drafted by: China Surveying and Mapping (Beijing) Remote Sensing Technology Co., Ltd., Sichuan China Surveying and Mapping Tianxiang Remote Sensing Technology Co., Ltd., Wuhan Zhongce Shengtu Remote Sensing Technology Co., Ltd., National Basic Geographic Information Center, Civil Aviation University of China, Beijing University of Civil Engineering, National Surveying and Mapping Engineering Technology Research Center.

The main drafters of this document are: Li Yingcheng, Li Xilin, Xue Yanli, Ren Yafeng, Liu Fei, Zheng Anwu, Liu Jianli, Jiang Dan, Guo Tongying, Bi Kai, Zhao Junxia, Geng Zengxian, Li Xinzhi, Hu Guang, Zheng Chunjun, Wen Wang, Cao Hualong, and Li Changke.

Introduction

China's civil UAV remote sensing system is widely used in aerial photogrammetry, resource and environmental monitoring, infrastructure inspection, disaster emergency response, law enforcement and other remote sensing It has been widely used in mapping activities, and the amount of data obtained has increased exponentially year by year.

There are many, scattered equipment, diverse performance, complex technical parameters, and a lack of relevant technical parameters, affiliated units and other attribute information of UAV remote sensing systems.

The collection, integration and management of UAV remote sensing system resources make it difficult to achieve information sharing, rapid scheduling and reasonable allocation of UAV remote sensing system resources.

This document specifies the requirements for remote sensing systems of civil unmanned aerial vehicles (empty mass less than or equal to 116kg, takeoff weight less than or equal to 150kg).

Resource registration rules, remote sensing mapping mission registration rules and flight plan registration rules to support the construction of China's UAV remote sensing system resource library The system is established to realize the information collection and dispatch of UAV remote sensing system resources; standardize the registration of missions and flight plans for UAV remote sensing activities;

This information lays the foundation for the flight management of China's civil UAV remote sensing system and has a positive impact on the implementation of the "Interim Regulations on the Flight Management of Unmanned Aerial Vehicles". Driving effect.

Registration Specifications for UAV Remote Sensing Mapping

1 Scope

This document specifies the requirements for remote sensing systems of civil unmanned aerial vehicles (empty mass less than or equal to 116kg, takeoff weight less than or equal to 150kg).

Contents and requirements of resource registration, remote sensing mapping mission registration and flight plan registration.

This document applies to the registration of civil drone remote sensing mapping.

2 Normative references

GB/T 41300

3 Terms and definitions

The following terms and definitions apply to this document.

4 Resource Registration