Valid

GB 12995-2006Combustion-motor-driven wheelchairs (English PDF)

机动轮椅车

Preview PDF

This is a limited preview

Buy now to download the full PDF (14 pages)

Need quotation for your management?

Get a formal quotation for GB 12995-2006 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China

Level / Type

National · Mandatory

Issue date

March 10, 2006

Implementation date

December 1, 2006

Scope

GB 12995-2006 is the English-translated version of 机动轮椅车.

GB 12995-2006 specifies the terms, model designation, technical requirements, sampling and test methods, inspection rules, marking, instructions for use, packaging, transport and storage of combustion-motor-driven wheelchairs.

It applies to petrol-engined wheelchairs, generally three-wheeled, driven by persons with lower-limb disabilities whose upper limbs are fully functional; light wheelchairs have a nominal displacement up to 50 mL and general wheelchairs above 50 mL up to 150 mL.

Clauses 5.1 and 5.2, the mandatory part, require all controls to be operated by the upper limbs, a disability sign, a side-tilt stability angle of at least 25°, a maximum design speed of 50 km/h, braking distances of 4 m at 20 km/h (light) and 7.5 m at 30 km/h (general), and compliance with the motorcycle standards on lighting, horns, mirrors, exhaust emissions, noise and radio disturbance; further clauses set dimensions, starting, gradeability, fuel consumption, assembly and appearance requirements and the corresponding test methods.

It replaces GB 12995-1991, adding terms and abbreviations, a new model designation method and extended technical requirements and test methods. Issued on 10 March 2006 and in force since 1 December 2006.

Classification: ICS 11.180.10, CCS C45. The document runs to 14 pages, delivered complete in English translation.

Found what you need?

Document preview — GB 12995-2006

National Standard of the People's Republic of China

ICS: 11.180.10
Classification: C45
Replacing: GB 12995-1991

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China

Foreword
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Model
5 Technical requirements
6 Sampling and test methods
7 Inspection rules
8 Marking and instruction manual
9 Packaging, transport and storage
Annex A (normative) Marking of vehicles for persons with disabilities
Annex B (informative) Technical specifications of motorized wheelchairs

3 Terms, definitions and abbreviations

4 Model

5 Technical requirements

6 Sampling and test methods

7 Inspection rules

8 Marking and instruction manual

9 Packaging, transport and storage

Foreword

Clauses 5.1 and 5.2 of this standard are mandatory; the remaining clauses are recommended.

This standard replaces GB 12995-91, Combustion-motor-driven wheelchairs.

Compared with GB 12995-91, the main changes are as follows:

- some newly issued national standards have been added to the normative references;

- terms, definitions and abbreviations have been added;

- the method of model designation has been modified;

- the content of the technical requirements has been modified and extended;

- some inspection items and inspection methods have been specified in more detail;

- marking, packaging, transport and storage have been reorganised into two clauses, namely marking and instructions for use, and packaging, transport and storage, and their content has been suitably abridged and modified;

- the content and wording of the provisions have been revised.

Annex A of this standard is normative; Annex B is informative.

This standard was proposed by the Ministry of Civil Affairs of the People's Republic of China.

This standard is under the jurisdiction of the National Technical Committee for Standardization of Rehabilitation and Special Equipment for Persons with Disabilities.

Drafting organisations of this standard: National Rehabilitation Equipment Quality Supervision and Inspection Center, China Jialing Industrial Co., Ltd. (Group), Zhenjiang Yuejin Machinery Factory, Danyang Jincheng Special Vehicle Co., Ltd.

Main drafters of this standard: Yu Lianjia, Chen Guang, Li Xinchun, Zhuang Hong, Hu Danian.

Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of China on 2006-03-10; implemented from 2006-12-01.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 5376 · GB/T 5381 · GB/T 5382.1 · GB/T 5382.2 · GB/T 5384 · GB/T 5387 · GB 9969.1 · GB/T 15364 · GB/T 15744 · GB/T 16708

Similar standards

GB 12475-2006|GB 19456-2004|GB 16473-1996|GB 12950-1991|GB 2702-1990|GB 11217-1989

How to Download GB 12995-2006

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.