JB/T 11730-2013Electrical equipment and systems of industrial machines - Technical requirements for AC servo drive systems of plastics injection moulding machines (English PDF)
工业机械电气设备及系统 注塑机交流伺服驱动系统技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11730-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11730-2013 is the English-translated version of 工业机械电气设备及系统 注塑机交流伺服驱动系统技术条件.
JB/T 11730-2013 is the recommended Chinese machinery industry standard on the electrical equipment and systems of industrial machines, and within that field it covers the alternating current servo drive systems of plastics injection moulding machines.
It sets the technical requirements for such a drive system, its inspection and test methods, and the requirements for marking, packaging and storage. It applies to AC servo drive systems for hydraulically controlled injection moulding machines.
The document is classified J07 in the Chinese system and 25.040 in the international one, and it was issued by the Ministry of Industry and Information Technology.
Among the standards it quotes are GB/T 2423.3-2006, GB 4208-2008, GB/T 4365-2003, GB 5226.1-2008, GB/T 9969-2008 and GB/T 17626.2-2006.
Found what you need?
Document preview — JB/T 11730-2013
National Standard of the People's Republic of China
- ICS
- 25.040
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 11730-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
2 Scope
This standard is the recommended Chinese machinery industry standard on the electrical equipment and systems of industrial machines, and within that field it covers the alternating current servo drive systems of plastics injection moulding machines. It sets the technical requirements for such a drive system, its inspection and test methods, and the requirements for marking, packaging and storage. It applies to AC servo drive systems for hydraulically controlled injection moulding machines. The document is classified J07 in the Chinese system and 25.040 in the international one, and it was issued by the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 2423.3-2006, GB 4208-2008, GB/T 4365-2003, GB 5226.1-2008, GB/T 9969-2008 and GB/T 17626.2-2006.
3 Normative references
JB/T 11730-2013 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 191-2008
GB/T 2423.3-2006
GB 4208-2008
GB/T 4365-2003 — Electrotechnical terminology -- Electromagnetic compatibility
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 4588.4-1996
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB 5226.1-2008
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 17626.2-2006
GB/T 17626.3-2006
GB/T 17626.4-2008
GB/T 17626.5-2008
GB/T 17626.6-2008
GB/T 17626.
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 25.040
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 4365-2003Electrotechnical terminology-Electromagnetic compatibility
- GB/T 4588.2-1996Sectional specification: single and double sided printed boards with plated-through holes
- GB/T 4588.4-1996Sectional specification for rigid multilayer printed boards
- GB/T 5080.7-1986Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB 4208-2008 · GB 5226.1-2008 · GB/T 17626.
Similar standards
How to Download JB/T 11730-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4365-2003 — Electrotechnical terminology -- Electromagnetic compatibility
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
Secure payment via Stripe
Payments accepted
JB/T 11730-2013
$500.00