GB/T 39483.1-2020Rubber and plastics injection moulding machine - Interface - Part 1: Mechanical and electrical interface (English PDF)
橡胶塑料注射成型机 接口 第1部分：机械和电气接口
This is a limited preview
Buy now to download the full PDF (38 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39483.1-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
October 1, 2021
Scope
GB/T 39483.1-2020 is the English-translated version of 橡胶塑料注射成型机 接口 第1部分：机械和电气接口.
GB/T 39483.1-2020 is the Chinese standard "Rubber and plastics injection moulding machine - Interface - Part 1: Mechanical and electrical interface".
Its scope clause reads: This part of GB/T 39483 specifies the rubber plastic injection molding machine and manipulator device, external safety device, magnetic template, mold change Mechanical and electrical interface between equipment and special process equipment.
This section applies to all types of rubber plastic injection molding machines. Its clauses include terms and definitions, abbreviations.
Found what you need?
Document preview — GB/T 39483.1-2020
National Standard of the People's Republic of China
- ICS
- 71.120
- Classification
- G 95
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions, abbreviations1
- 3.1 Terms and definitions1
- 3.2 Abbreviations3
- 4 Interface between injection molding machine and manipulator3
- 4.1 Mechanical interface between injection molding machine and manipulator3
- 4.2 Electrical interface between injection molding machine and manipulator5
- 5 Electrical interface between injection molding machine and external safety device21
- 5.1 Electrical interface of class I external safety device21
- 5.2 Electrical interface of class II external safety device24
- 6 The electrical interface between the injection molding machine and the magnetic template and the mold changing device28
- 6.1 Electrical interface between injection molding machine and magnetic template28
- 6.2 Electrical interface between injection molding machine and mold changing device31
- 7 Electrical interface between injection molding machine and special process device37
- 7.1 The electrical interface between the injection molding machine and the fluid injection mechanism37
- 7.2 Electrical interface between injection molding machine and neutron40
1 Scope
This part of GB/T 39483 specifies the rubber plastic injection molding machine and manipulator device, external safety device, magnetic template, mold change
Mechanical and electrical interface between equipment and special process equipment.
This section applies to all types of rubber plastic injection molding machines.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 1184 shape and position tolerance without tolerance value
GB/T 5226.1 Electrical safety of machinery Electrical equipment of machinery Part 1.General technical conditions
GB/T 15969.2-2008 Programmable Controller Part 2.Equipment Requirements and Testing
GB/T 16839.1-2018 Thermocouple Part 1.Electromotive Force Specification and Tolerance
GB/T 16855.1 Safety-related components of machinery safety control system Part 1.General design rules
GB/T 18831-2017 Interlocking device design and selection principles related to mechanical safety and protective devices
GB 22530-2008 Safety requirements for rubber plastic injection molding machines
GB/T 27025 General requirements for the competence of testing and calibration laboratories
GB/T 36587 Terminology for rubber and plastic machinery
3 Terms and definitions, abbreviations
3.1 Terms and definitions
The terms and definitions defined in GB/T 36587 and the following are applicable to this document. For ease of use, GB/T 36587 is repeatedly listed below
Some terms and definitions.
3.1.1 Rubber Plastic Injection Molding Machine
Composed of injection, mold clamping and other parts, using rubber/plastic as processing raw materials, with mold opening and closing, mold clamping, plasticization, injection, vulcanization/shaping cooling
Molding machinery with functions such as mold release and mold release.
[GB/T 36587-2018, definition 3.5.1]
3.1.2 Manipulator
A function that can imitate certain movements of human hands and arms for automatic operation of grasping, transporting objects or operating tools according to a fixed program
Device.
3.1.3 Clamping device
It has the functions of fixing the mold, realizing the movement of opening and closing the mold and locking the mold.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 38 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39483.1-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 39483.2-2020 — Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 39483.1-2020
$590.00