GB/T 39483.2-2020Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface (English PDF)
橡胶塑料注射成型机 接口 第2部分：数据交换接口
This is a limited preview
Buy now to download the full PDF (271 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39483.2-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
November 1, 2021
Scope
GB/T 39483.2-2020 is the English-translated version of 橡胶塑料注射成型机 接口 第2部分：数据交换接口.
GB/T 39483.2-2020 is the Chinese standard "Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface".
Its scope clause reads: This part of GB/T 39483 specifies the basic protocol and data interface for rubber plastic injection molding machines, covering the following content: ---Terms, definitions and abbreviations: ---Basic protocol, including Modbus basic protocol, OPCDA basic protocol, OPCUA basic protocol and general data Types of: ---Data interface, including data interface between injection molding machine and MES based on OPCDA basic protocol; OPC Data interface between injection molding machine and MES based on UA basic protocol; Note based on Modbus basic protocol Data interface between injection molding machine and peripheral device; injection molding machine and peripheral device based on OPCUA basic protocol Data interface between: Peripheral devices include mold temperature controller, chiller, feeder, dryer, manipulator, magnetic template, mold changer, Hot runner device, LSR (liquid silica gel) feeding system, energy consumption meter, two-color machine turntable: This section applies to all types of rubber plastic injection molding machines:. Its clauses include terms, definitions and abbreviations.
Found what you need?
Document preview — GB/T 39483.2-2020
National Standard of the People's Republic of China
- ICS
- 71.120
- Classification
- G 95
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviations
- 3:1 Terms and definitions
- 3:2 Abbreviations
- 4 Basic agreement
- 4:1 Modbus
- 4:1:1 General overview
- 4:1:2 General Specification
- 4:2 OPCDA
- 4:2:1 Basic Principles of Data Access
- 4:2:2 Overview of OPC
- 4:2:3 OPCDA scope of application
- 4:2:4 General OPCDA architecture and composition
- 4:2:5 Companion specification of OPCDA data access architecture
- 4:2:6 Overview of objects and interfaces
- 4:2:7 Server address space and configuration
- 4:2:8 Application-level server and network node selection
- 4:2:9 Synchronization and serial issues
- 4:2:10 Permanent storage process
- 4:3 OPCUA
- 4:3:1 OPCUA Basic Protocol
- 4:3:2 OPCUA common data type
- 5 Data interface
- 5:1 MES interface
- 5:1:1 OPCDA MES interface
- 5:1:2 OPCUA's MES interface
- 5:2 Peripheral device interface
- 5:2:1 Mold temperature controller interface
- 5:2:2 Chiller interface
- 5:2:3 Feeder interface
- 5:2:4 Dryer interface:199
- 5:2:5 Manipulator interface
- 5:2:6 Magnetic template interface
- 5:2:7 Die changer interface
- 5:2:8 Hot runner device interface
- 5:2:9 LSR feeding system interface
- 5:2:10 Energy consumption meter interface
- 5:2:11 Two-color machine turntable interface
- Appendix A (informative appendix) OPCDA data type
- Appendix B (informative appendix) OPCUA data type
1 Scope
This part of GB/T 39483 specifies the basic protocol and data interface for rubber plastic injection molding machines, covering the following content:
---Terms, definitions and abbreviations:
---Basic protocol, including Modbus basic protocol, OPCDA basic protocol, OPCUA basic protocol and general data
Types of:
---Data interface, including data interface between injection molding machine and MES based on OPCDA basic protocol; OPC Data interface between injection molding machine and MES based on UA basic protocol; Note based on Modbus basic protocol
Data interface between injection molding machine and peripheral device; injection molding machine and peripheral device based on OPCUA basic protocol
Data interface between: Peripheral devices include mold temperature controller, chiller, feeder, dryer, manipulator, magnetic template, mold changer,
Hot runner device, LSR (liquid silica gel) feeding system, energy consumption meter, two-color machine turntable:
This section applies to all types of rubber plastic injection molding machines:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 19582:2 Industrial automation network specification based on Modbus protocol Part 2: Modbus protocol in serial link
Implementation guide on
GB/T 19582:3 Industrial automation network specification based on Modbus protocol Part 3: Modbus protocol in TCP/IP Implementation guide on
GB/T 33863:1 OPC Unified Architecture Part 1: Overview and Concepts
GB/T 33863:2-2017 OPC Unified Architecture Part 2: Security Model
GB/T 33863:3 OPC Unified Architecture Part 3: Address Space Model
GB/T 33863:4 OPC Unified Architecture Part 4: Service
GB/T 33863:5 OPC Unified Architecture Part 5: Information Model
GB/T 33863:6 OPC Unified Architecture Part 6: Mapping
GB/T 33863:7 OPC Unified Architecture Part 7: Profile
GB/T 33863:8 OPC Unified Architecture Part 8: Data Access
3 Terms, definitions and abbreviations
3:1 Terms and definitions
The terms and definitions defined in GB/T 33863:1~GB/T 33863:8 and GB/T 19582:2 and the following terms and definitions apply to this document: for
For ease of use, some terms and definitions in GB/T 33863:1~GB/T 33863:8 and GB/T 19582:2 are repeatedly listed below:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 271 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39483.2-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 39483.1-2020 — Rubber and plastics injection moulding machine - Interface - Part 1: Mechanical and electrical interface
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 39483.2-2020
$4,790.00