Valid

JB/T 13448-2018Screw-plunger plastic injection moulding machines (English PDF)

螺杆柱塞式塑料注射成型机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13448-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2018

Implementation date

December 1, 2018

Scope

JB/T 13448-2018 is the English-translated version of 螺杆柱塞式塑料注射成型机.

JB/T 13448-2018 is a recommended standard of the Chinese machinery industry covering the screw-plunger plastic injection moulding machine.

It opens with terms and definitions, gives the model designation and basic parameters, and then states the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.

Injection moulding machines of the screw-plunger construction are the products it governs. Standards quoted in it include GB/T 191, GB/T 321-2005, GB/T 6388, GB/T 9969, GB/T 12783, GB/T 13384, GB 22530, GB/T 25156-2010, GB/T 25157-2010, HG/T 3120, HG/T 3228-2001 and JB/T 5438. It is classified under G95, with the international codes 71.120 and 83.200.

Found what you need?

Document preview — JB/T 13448-2018

National Standard of the People's Republic of China

ICS: 71.120; 83.200

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword
Scope
Normative references
About this standard
Classification and status

1 Foreword

JB/T 13448-2018 was issued by MIIT on 30 April 2018 and has been in force since 1 December 2018.

2 Scope

This standard is a recommended standard of the Chinese machinery industry covering the screw-plunger plastic injection moulding machine. It opens with terms and definitions, gives the model designation and basic parameters, and then states the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. Injection moulding machines of the screw-plunger construction are the products it governs. Standards quoted in it include GB/T 191, GB/T 321-2005, GB/T 6388, GB/T 9969, GB/T 12783, GB/T 13384, GB 22530, GB/T 25156-2010, GB/T 25157-2010, HG/T 3120, HG/T 3228-2001 and JB/T 5438. It is classified under G95, with the international codes 71.120 and 83.200.

3 Normative references

JB/T 13448-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 191

GB/T 321-2005 — Preferred numbers -- Series of preferred numbers

GB/T 6388

GB/T 9969

GB/T 12783

GB/T13306

GB/T 13384

GB 22530

GB/T 25156-2010

GB/T 25157-2010

HG/T 3120

HG/T 3228-2001 — General technical specifications for painting of rubber and plastics machinery

JB/T 5438

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Classification and status

International classification (ICS): 71.120; 83.200

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T13306 · GB 22530 · GB/T 25157-2010

Similar standards

JB/T 8943-2015|GB/T 30200-2023|GB/T 22530-2022|GB/T 25156-2020|GB/T 38533-2020|JB/T 5176-2018

How to Download JB/T 13448-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.