JB/T 10894-2008Computer control systems for plastics injection moulding machines - General technical requirements (English PDF)
注塑机计算机控制系统 通用技术条件
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10894-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10894-2008 is the English-translated version of 注塑机计算机控制系统 通用技术条件.
JB/T 10894-2008 is a recommended Chinese machinery industry standard setting the general technical requirements for the computer control systems of plastics injection moulding machines.
It states the technical requirements for the control system and the test methods by which they are verified, and it covers inspection as well as marking, packaging and storage.
All types of injection moulding machine control system fall within its field, and the computer control systems of other related machinery may be handled by reference to it.
Among the standards it quotes are GB 5226.1-2002, GB/T 4365-2003, GB/T 17626.11-1999 and JB/T 5438-1991. It is classified J50 and 25.040.20.
Found what you need?
Document preview — JB/T 10894-2008
National Standard of the People's Republic of China
- ICS
- 25.040.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 10894-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 20 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard setting the general technical requirements for the computer control systems of plastics injection moulding machines. It states the technical requirements for the control system and the test methods by which they are verified, and it covers inspection as well as marking, packaging and storage. All types of injection moulding machine control system fall within its field, and the computer control systems of other related machinery may be handled by reference to it. Among the standards it quotes are GB 5226.1-2002, GB/T 4365-2003, GB/T 17626.11-1999 and JB/T 5438-1991. It is classified J50 and 25.040.20.
JB/T 10894-2008 falls under ICS 25.040.20, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state
GB/T 3187-1994 — Reliability and maintainability terms
GB 4208-1993 — Degrees of protection provided by enclosure (IP code)
GB/T 4365-2003 — Electrotechnical terminology -- Electromagnetic compatibility
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 4588.4-1996 — Sectional specification. Multilayer printed boards
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB 5226.1-2002/IEC 60204-1-2000
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 14436-1993 — General Principles of Industrial Product Guarantee Documents
GB/T 15969.2-1995 — Programmable controllers. Part 2: Equipment characteristics
GB/T 17626.2-2006 — Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3-2006 — Electromagnetic compatibility - Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.4-1998 — Electromagnetic compatibility--Testing and measurement techniques--Electrical fast transient/burst immunity test
GB/T 17626.5-1999 — Electromagnetic compatibility--Testing and measurement techniques--Surge immunity test
GB/T 17626.6-1998 — Electromagnetic compatibility Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields
GB/T 17626.11-1999 — Electromagnetic compatibility. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
JB/T 5438-1991 — Plastics machinery - Terminology
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 20 pages
5 Related standards
Standards on related subjects:
GB 15760-2025 — Metal cutting machines - General specifications for safeguarding
GB/T 9061-2025 — Metal-cutting machine tools - General specifications
GB/T 5900.1-2021 — Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection
JB/T 15209-2025 — Synthetic cutting fluids for cemented carbide
JB/T 15193-2025 — Testing method for sticking and sliding characteristics of guide rail oil
JB/T 15087-2025 — Technical specifications for evaluation of green design products - CNC machine tools
6 Classification and status
International classification (ICS): 25.040.20
Chinese Standard Classification (CCS): J 50
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2000Graphical symbols marking for handling and storage of packages
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 3187-1994Reliability and maintainability terms
- GB 4208-1993Degrees of Protection Provided By Enclosure (IP Code)
- GB/T 4365-2003Electrotechnical terminology-Electromagnetic compatibility
- GB/T 4588.2-1996Sectional specification: single and double sided printed boards with plated-through holes
Similar standards
How to Download JB/T 10894-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4208-1993 — Degrees of protection provided by enclosure (IP code)
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 14436-1993 — General Principles of Industrial Product Guarantee Documents
JB/T 10894-2008
$345.00