GB/T 5121.3-2008Methods for chemical analysis of copper and copper alloys -- Part 3: Determination of lead content (English PDF)

Foreword

GB/T 5121 "Copper and copper alloy chemical analysis method" a total of 27 sections.

--- Part 1. Determination of copper content;

--- Part 2. Determination of phosphorus content;

--- Part 3. Determination of lead content;

--- Part 4. Carbon, Determination of sulfur content;

--- Part 5. Determination of nickel content;

--- Part 6. Determination of bismuth content;

--- Part 7. Determination of arsenic content;

--- Part 8. Determination of oxygen content;

--- Part 9. Determination of iron content;

--- Part 10. Determination of tin content;

--- Part 11. Determination of zinc content;

--- Part 12. Determination of antimony content;

--- Part 13. Determination of aluminum content;

--- Part 14. Determination of manganese content;

--- Part 15. Determination of cobalt content;

--- Part 16. Determination of chromium content;

--- Part 17. Determination of beryllium content;

--- Part 18. Determination of magnesium content;

--- Part 19. Determination of silver content;

--- Part 20. Determination of zirconium content;

--- Part 21. Determination of titanium content;

--- Part 22. Determination of cadmium content;

--- Part 23. Determination of silicon content;

--- Part 24. selenium, tellurium content was measured;

--- Part 25. Determination of boron content;

--- Part 26. Determination of mercury content;

--- Part 27. Inductively coupled plasma atomic emission spectrometry.

This is Part 3.

This section includes a method, Method II.

The second method to modify the part using ISO 4749. 1984 "Determination of copper alloys --- --- lead content by flame atomic absorption spectrophotometry" in the main technical content of ISO 4749. 1984 the same structure does not correspond exactly to write. Specific technical difference in Appendix A, Appendix B.

This Part replaces GB/T 5121.3-1996 "Copper and copper alloys - Determination of lead content" and GB/T 13293.7-1991 "Methods for chemical analysis of high purity copper cathode Zeeman effect electrothermal atomic absorption spectrometric method for the determination of iron, cobalt, lead content." this portion of the GB/T 5121.3-1996, GB/T 13293.7-1991 The main changes are as follows.

--- One method of GB/T 13293.7-1991 the revision. Measured by the scope of 0.0001% ~ 0.002% revised to 0.0001% to 0.0015% supplemented with quality assurance and control provisions, increasing the precision of the terms;

--- Second method is GB/T 5121.3-1996 revision, complementing the quality assurance and control provisions, increasing the precision of the terms.

This section in Appendix A, Appendix B is an informative annex.

This part is proposed by the China Nonferrous Metals Industry Association.

The non-ferrous metal part by the National Standardization Technical Committee.

This section Chinalco Luoyang Copper Co., Ltd., Beijing General Research Institute of Mining and Metallurgy, China Nonferrous Metals Industry is responsible Institute of Standards Metrology and Quality Drafted.

A method in this section was drafted by Beijing General Research Institute of Mining and Metallurgy.

A method in this section by the Jinchuan Group Co., Ltd., Guangzhou Nonferrous Metal Research Institute participated in the drafting.

1 Method, a Zeeman effect electrothermal atomic absorption spectrometry