JB/T 10974-2010Art cast musical instruments (English PDF)
艺术铸造乐器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10974-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 10974-2010 is the English-translated version of 艺术铸造乐器.
Cast musical instruments are what JB/T 10974-2010 covers, a recommended standard of the Chinese machinery industry. The document deals with products made chiefly by casting that are both ornamental and playable as instruments: it classifies and grades them and lays down their technical requirements and inspection rules.
Its field takes in bronze percussion instruments supplied as single pieces, in groups or in complete sets, such as bells, chime bell sets and cymbals. Among the standards it quotes are GB/T 5121.1, GB/T 5121.3, GB/T 5121.10 and GB/T 5121.11. In the classification schemes the standard carries J31 and 77.150.30.
Found what you need?
Document preview — JB/T 10974-2010
National Standard of the People's Republic of China
- ICS
- 77.150.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10974-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Cast musical instruments are what JB/T 10974-2010 covers, a recommended standard of the Chinese machinery industry. The document deals with products made chiefly by casting that are both ornamental and playable as instruments: it classifies and grades them and lays down their technical requirements and inspection rules. Its field takes in bronze percussion instruments supplied as single pieces, in groups or in complete sets, such as bells, chime bell sets and cymbals. Among the standards it quotes are GB/T 5121.1, GB/T 5121.3, GB/T 5121.10 and GB/T 5121.11. In the classification schemes the standard carries J31 and 77.150.30.
JB/T 10974-2010 falls under ICS 77.150.30, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 5121.1
GB/T 5121.3
GB/T 5121.10
GB/T 5121.11
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 11351-2017 — Mass tolerances of casting
JB/T 8583-2008 — Resin coated sand for foundry
JB/T 11018-2025 — Cr10 stainless steel castings for steam turbines of supercritical and ultra-supercritical units - Technical specification
JB/T 10975-2010 — Art cast percussion instruments
JB/T 10973-2010 — Art cast bronze sculptures
6 Classification and status
International classification (ICS): 77.150.30
Chinese Standard Classification (CCS): J 31
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 5121.1Methods for chemical analysis of copper and copper alloys -- Part 1: Determination of copper content
- GB/T 5121.3Methods for chemical analysis of copper and copper alloys -- Part 3: Determination of lead content
- GB/T 5121.10Methods for chemical analysis of copper and copper alloys -- Part 10: Determination of tin content
- GB/T 5121.11Methods for chemical analysis of copper and copper alloys -- Part 11: Determination of zinc content
Similar standards
How to Download JB/T 10974-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5121.1-1985 — Methods for chemical analysis of copper--The electrolytic method for the determination of copper content
GB/T 5121.1-1996 — Copper and copper alloys--Determination of copper content
GB/T 5121.1-2008 — Methods for chemical analysis of copper and copper alloys -- Part 1: Determination of copper content
JB/T 10974-2010
$105.00